Not that I have compared the two: there is another graphene paste from madscientistaudio.com in NZ which comes at a much more accessible price with similar acclaim. I chose to order it after having had a very good experience with Acoustic Revive ECI-50 spray which follows a similar approach. Will report on results once I receive it.Interesting... Please tell me personaly in my thread i dont want to miss your review...
Snake oil??
Well, on March 8th, at the age of 64, I suffered a mild stroke. I have felt that things were returning to normal for the last few weeks. Now I’m not so sure. I just reviewed an email that came to me from Agon about a mysterious substance involving something called 3-Dimensional Enhancer, the NPS 1260. It claims to cure literally all my audio problems for the low price of $599. Is this some leftover April Fools thing or am I having some sort of stroke relapse? I’m hoping that MC has some form to sage advice for this conundrum.
- ...
- 102 posts total
Have now applied Madscientistadio.com’s Graphene Contact Enhancer with great results. I started with Caig Deoxit Gold, moved on to Acoustic Revive ECI-50 spray and now applied the above to the same contacts. In each step there was a clear improvement: it manifests itself in a perceived pickup of music‘s rhythm and pace. There is perception of better dynamics and clarity along with a reduction of graininess and sibilance, everything appears more immediate and less forced. The Madscientist Audio material needs to be applied in small quantities: when I put too much on the RJ45 connector to the router, the signal stopped until I removed most of it. Compared to the Acoustic Revive, the effect was greatest when treating fuses and mains leads. Highly recommended. |
Master M, Check it out.. I would PM you but it will delete the address. I've added just water, and just 3 in one oil mixed to a paste. I dried my stuff with a heat gun. The water based worked GREAT if you didn't remove the artifact and reinstall or reverse the direction in the case of a fuse or breaker. The 3 in one worked better. You can make a QUART of enhancer for 22.00 usd. Sell your goodies for 35.00 a tiny bottle and FUND a 50,000.00 stereo system.. Who says we can't think BIG.. That 22.00 will make that much enhancer.. I bought 4 10 ounce bags 10 years ago for 120. usd Enough for 5-7 GALLONS.. I've also used Nuclear Never Seize and added about 1/4 to the amount being mixed. 1/4 dust, 3/4 NNS, mix and thin with 3 in ONE, one drop at a time.. SEE I share.. Because the effect of graphene as a SUPER conductor requires a single layer to achieve 1000% conductivity increase, I'll settle for 100% plus if I can get it by applying the product below.. Think THIN... OK Master M., that will being your system up to 522.00 plus the cost of 3 in ONE.. I had some laying around.. :-) <<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>> 2 items 2.2.oz each 100 % conductive carbon Graphene powder : Extra Fine https://www.ebay.com/itm/153433640674 <<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>> To all the naysayers.. 22.00 usd. My gift to you... Enjoy.. MOCK if you must... BUT it works pretty darn good.. Dip a bare wire in it, install the wire into the barrel of the terminal and 20-50 tons from a press OR a single hammer strike to set the terminal to the cable end and a second one to WELD the two.. You can't get better contact.. I use an old speedo cable dye and a 6 pounder. Don't hit it a THIRD time, that will loosen it.. 20-30 ton hammer strike, YUP... Regards |
- 102 posts total