Torture test for a TT rig!

Dear @mglik  : Good to know it, enjoy it.

R.

Dear @mijostyn : Even that the mglik trouble already fixed and not because I was rigth I want to comment that it’s not true what you posted because even you all have a misunderstood in the overall issue ( for say the least because the word is: all are wrong. ).

""" Both lewm, atmasphere and Chakster are correct. You have to add mass to get the resonance frequency down to 8 Hz. ""

The best test recordings to fix cartridge/tonearm mistracking are the ones where the owner has the problem of mistracking ( not only the Telarc 1812. ).
A professional test LP can’t gives me the solution can’t fix the problem neither the LPs where the mistracking is happening. So who cares of a test LP to fix the mistracking problem?

Lewm said to add 5gr.-10grs. and what happens when with that cartridge/tonearm combination we adds those weigth values: almost nothing because from 12hz ( that’s inside the ideal range. ) " thing " goes to 11hz and this change nothing about mistraking but your advise is even worst because with that cartridge for achieve 8hz ( as you said. ) you need a tonearm with 40grs. of EM and even that you can’t be sure that that Shilabe can track with out problem because the problem was not there.

The other advise is wrong too for the same reason because the counterweigth in a tonearm even that we positioned it far away from the pivot the resonance frequency will change from 12hz to 11.8hz and additional to that this goes against the tracking of any cartridge because the best position for a counterweigth tonearm ( no matters what. ) always must be at the nearest to the pivot we can make the set up.

It’s way more easy for the tonearm to control de vertical/horizontal extremely fast movements when the counterweigth is at " the pivot " that far away from it. Not only JC posted years ago but tonearms manufacturers and professional analog reviewers too. Different tonearm weigth counterweigths are not for change the effective tonearm mass but to try that the choosed counterweigth stays nearer to the tonearm pivot.

I posted all those not to open a new thread window but only to share my " findings " to other gentlemans that even that do not posted here are reading the thread.

Of course that I can be wrong but this is not the subject.

At the end the important issue for the OP is that rigth now he is enjoying his Shilabe one.

R.

@rauliruegas , I assumed the OP was using the correct VTF, bad assumption. Non the less a stiff cartridge in an arm that is too light will pop right out of the groove when the right note comes along. Years ago I made exactly that mistake. The OPs tracking is much better given the added 0.7 grams but that does not mean his arm is set up correctly. The Hi FI News Analog Test Record has excellent resonance tracks. These are not the tracks used for tracking ability or anti skating adjustment. Everyone who wants the best bass performance out of their set up needs to get the vertical resonance frequency down between 8 and 10 Hz. As you add more mass to the tonearm the resonance frequency will drop. Soundsmith's graded screws are a wonderful way to do this. The OP will find that with anti skate and resonance frequencies set correctly he will get even better performance. If you disagree with this paragraph then I am afraid there is no hope for you. Sincerely, Me

Nice that increasing the tracking pressure solved it :)

This is entire off topic, but that cartridge is pretty low compliance, suggesting that its designed for a high mass arm. Perhaps the Fidelity Research? Its nice that the Triplanar will work with it regardless.

Dear @mijostyn :  Can you read? because I posted:

""  I posted all those not to open a new thread window. ""


 As always you are baised with your way of thinking and no other " thing " coming from other persons are not good for you and  not even give its importance .

"   I am afraid there is no hope for you. "

Sorry but It's the other way around. Problem with you is that just  do not make your " home work " :

""  I assumed the OP was using the correct VTF, bad assumption. ""

So go with the OP and tell him that change his arm for one with 40grs. of EM or that add 30grs. at the headshell position .

Btw, the OP is waiting for the top of the line Lyra cartridge.

You are not stupid ( as other two persons that posted here. ) so you can learn, there is always hope for you. Sincerely, Me.

R.