So you think wire conductors in cables are directional? Think again...

Why do some retorts always fall back on the costs of uber expensive cables when it's not brought up to begin with? That belies a lot angst on the part of some.

As for the "report button" alluded to, it doesn't disappear. Just move your cursor over to where it resides (lower right hand corner) and it will appear, like Tinker Bell, and pressing it will reward you with untold powers to silence those you disagree with.

All the best,
Nonoise

Why would I want to silence those I disagree with?...and vice versa? Discussions are supposed to be an exchange of ideas.

The thing with uber expensive cables is the marketing claims that are flat out outrageous at AUDIO FREQUENCIES. These things can be measured. Differences in measurements at AUDIO FREQUENCIES can be heard.

I don’t care what you spend your money on, I simply want manufacturers to prove their claims are a physical attribute and not psychological. Speaker systems and amplifiers can change their sound daily based on ambient temperature, humidity, and how much air is in a room at any given moment. Ears also change response based on how long one has been listening and at what SPL. Show me where a cable... an esoteric cable manufacturer discloses these things.

BTW...thanks for the "Report" tip. I’ve seen it before but failed to remember about the cursor.

how much air is in a room at any given moment

....?....

Since it is " at any given moment" we can rule out altitude issues. Then we have to assume that air pressure changes over a given moment are at play and that would require air movement. So, any thoughts about how the direction of the air flow would affect the sound ? ( you know, as it moves in and out of the room ).

Cheers

OP if your version of "Frat boy" is a LOT of us agree cables sound different, you’re right. If you install them one way and there are NO ARROWS and then install it the other way and DO or DON’T hear a difference, what camp does that put someone in?

Like a few poster here believe in bundles of cables, others mix and match, others zip cord.

I don’t think there are TWO camps, I think there are several different ideas, and not all will pass scrutiny. The neat part is it (how it sounds or doesn’t) can be ignored by ME or YOU. Still doesn’t change the fact someone has a better sounding system even though you or I can’t hear the difference that others can.

When two people have the exact same boxes, ALL the same. The room, the preamp, the amp, the speaker boxes, EVERYTHING is the same and the only difference is cabling.. That is an eye opener. That is what changed my mind 40 years ago on "different", cables sound different ways..

I truly think the biggest issue is not direction (I thought that was figured out 30 years ago) per say but SIZE. Bigger is not better, but it sure will do damage because of WEIGHT and size..

I’ve seen more than a few systems sound BAD behind BIG PC and oversized speaker ICs. Direction is a bonus and pays dividends in the construction of cables right on down to how you coil up a cable when IN use or NOT.

I suppose static discharge/drop and flop cabling sounds as good a carefully routed, pre coiled, pre conditioned, terminal end treated (with contact enhancer) cabling..

I really thought "Cable Direction" was a 30 year OLD topic.

Are there 20K speaker cables? Only if someone else pays for them.. Not ME..

I just looked at a 15K piece of stained glass that someone else commissioned to be made..  NOT ME!! I'm a 300.00 kind of guy and get out the soldering iron and glass cutter.. :-)

Amazing!

The thing with uber expensive cables is the marketing claims that are flat out outrageous at AUDIO FREQUENCIES. These things can be measured. Differences in measurements at AUDIO FREQUENCIES can be heard.

uh, sorry to inform you but intermixing harmonics and their result in how they are handled at the ear, deals with an expression in ultrahigh frequencies and down to the bottom. Basically dc to light speed kind of frequency response requirement, in audio cables. with zero problems in any area and zero preload (or load of the microsecond moment in play) interference in any slew up or slew down of any kind of complex load.

audio cables are easily seen and explained as the most complex signals that are dealt with in the world of electronics and signal transfer. easily. I’ll say it again. Easily.

When this was explained to a person who works at the peak of telecommunications industry and deals with the physics of various forms of transmission, they ended up agreeing. This is a person, btw..that basically has their masters in the physics of signal transmission.

Audio covers more octaves than ANY other kind of signal and it does it right from DC and on up. It is a hellaciously complex and wideband signal. It is the only one that has such extreme range, and it continually goes through the skin effect region in all of it’s complexities, overall. The interactions with the dynamic aspects of the impedance and the entire reactive and interactive aspects of the fundamental physics of a transmission line, are off the scale, compared to all other signals.

Audio is the ultimate stress test of an electrically based transmission line.

So, please, get a grip. Go talk to an expert if you can’t figure it out. Get educated.