This 100 watt Yamaha should be a nice fit with those speakers!
https://www.crutchfield.com/p_022AS701B/Yamaha-A-S701-Black.html
https://www.crutchfield.com/p_022AS701B/Yamaha-A-S701-Black.html
What is the best amplifier pairing for Monitor Audio Bronze 500 speakers?
Hello,
I recently purchased Monitor Audio Bronze 500 speakers, and I have them paired with a Denon AVR-2700 receiver and a Project Debut Carbon EVO turntable. With my initial 50 hrs of listening so far, I don't feel that I'm reaching the full potential of these speakers. I've listened to CD's and vinyl with the speakers, and while they sound good for most music, they are often too shrill when listening to classic rock- Led Zeppelin- Physical Graffiti,The Who- Meaty, Beaty, Big and Bouncy, Jefferson Airplane- Surrealistic Pillow, etc. I've listened to these same records on vinyl and Tidal-HD, and the shrillness is still present. I've attempted to play with the treble control on my Denon receiver, but it doesn't seem to change the sound much. The Denon AVR 2700 is over 23 years old at this point, and I don't know if it has enough power to effectively push these speakers? The Monitor Bronze 500 specs are below:
21/2-Way
Frequency Response (-6 dB)
41 – 25,000 Hz (Free field)
32 – 30,000 Hz (In room)
Sensitivity (2.83v @ 1m)
90 dB
Nominal Impedance
8 ohms
Minimum Impedance
4.1 ohms
Maximum SPL
116 dBA (pair)
Power Handling (RMS)
200 W
Recommended Amplifier Requirements
60 — 200 W
Bass Alignment
Bass reflex Dual HiVe II port system
Crossover Frequency
550 Hz
2,700 Hz
Drive Unit Complement
2 x 8" C-CAM midbass driver
1 x 25 mm C-CAM Gold Dome tweeter with UD Waveguide
External Dimensions (Including Grille and Terminals (H x W x D))
951 x 231 x 325 mm (377/16 x 91/8 x 1213/16")
External Dimensions (including Outrigger Feet and Spikes (H x W x D))
974 x 294 x 364 mm (383/8 x 119/16 x 145/16")
Weight (each)
18 kg (39 lb 11 oz)
I'm looking to spend no more than $1000 for an amplifier, and would like to still be able to run these speakers with my TV to watch movies. Please provide any recommendations that come to mind.
I recently purchased Monitor Audio Bronze 500 speakers, and I have them paired with a Denon AVR-2700 receiver and a Project Debut Carbon EVO turntable. With my initial 50 hrs of listening so far, I don't feel that I'm reaching the full potential of these speakers. I've listened to CD's and vinyl with the speakers, and while they sound good for most music, they are often too shrill when listening to classic rock- Led Zeppelin- Physical Graffiti,The Who- Meaty, Beaty, Big and Bouncy, Jefferson Airplane- Surrealistic Pillow, etc. I've listened to these same records on vinyl and Tidal-HD, and the shrillness is still present. I've attempted to play with the treble control on my Denon receiver, but it doesn't seem to change the sound much. The Denon AVR 2700 is over 23 years old at this point, and I don't know if it has enough power to effectively push these speakers? The Monitor Bronze 500 specs are below:
21/2-Way
Frequency Response (-6 dB)
41 – 25,000 Hz (Free field)
32 – 30,000 Hz (In room)
Sensitivity (2.83v @ 1m)
90 dB
Nominal Impedance
8 ohms
Minimum Impedance
4.1 ohms
Maximum SPL
116 dBA (pair)
Power Handling (RMS)
200 W
Recommended Amplifier Requirements
60 — 200 W
Bass Alignment
Bass reflex Dual HiVe II port system
Crossover Frequency
550 Hz
2,700 Hz
Drive Unit Complement
2 x 8" C-CAM midbass driver
1 x 25 mm C-CAM Gold Dome tweeter with UD Waveguide
External Dimensions (Including Grille and Terminals (H x W x D))
951 x 231 x 325 mm (377/16 x 91/8 x 1213/16")
External Dimensions (including Outrigger Feet and Spikes (H x W x D))
974 x 294 x 364 mm (383/8 x 119/16 x 145/16")
Weight (each)
18 kg (39 lb 11 oz)
I'm looking to spend no more than $1000 for an amplifier, and would like to still be able to run these speakers with my TV to watch movies. Please provide any recommendations that come to mind.
- ...
- 10 posts total
Yes, the problem in that equation is not the speakers. I just went from a Marantz AVR/Monitor Audio Silver combination, to Luxman Integrated/MA Silver and the difference is night and day. I was in a hurry to do speakers prior but am not necessarily seeing the need now. Want, yes but certainly not a need. |
Yogi- Thanks for the recommendation! Not real familiar with Yamaha's recent batch of receivers, but I had one back in the 80's. Why do you think they would be a nice fit for my Monitor Audio speakers? I would be willing to give it a shot for $800 if it was a definite step up from my current AVR. Russ: Thanks for the recommendation! I noticed that the Musical Fidelity amp is a bit out of my price range, though I might be able to stretch if it would make a huge difference in the sound. mtbiker: Thanks for your input! I wondered if it was the AVR that was keeping these from reaching their potential. What is the model for the Luxman Integrated amp that you paired with your MA Silvers? I saw one for almost $9000, but that's way too rich for my blood. |
The Yamaha has all the features you need including phono section. 100 watts is fine with the 90 db sensitive MA speakers. Crutchfield has a money back return policy incase you don’t find it better the Denon AVR. It is within your budget of less than a grand! http://www.hifi-review.net/410-yamaha-a-s701.html#:~:text=As%20an%20amplifier%2C%20the%20A%20S701%20.... |
- 10 posts total