2. analog
  3. 167613-96710

Zu Audio Modded Denon 103's

I bought a Zu Audio DL 103 Mk II cartridge - Grade 2 Prime cartridge for $1099 as a spare as my other cartridge was being repaired/inspected. At the time (September 2020), the cartridge sounded pretty good - this was my first modded DL 103. However, just as the cartridge was breaking in (~ 35 hours), I accidently hit my tonearm and sent it towards the platter and unfortunately snapped the cantilever right off. After a few cuss words, I realized there wasn't much I could do except send it in for a retip. So the next day, I sent it to VAS Audio to get it retipped. When Steve examined the cartridge, he told me that the right terminal of the cartridge was damaged internally and that due to the make of the cartridge (epoxy filled) that repairing it would be an issue. I then reached out to Zu Audio who confirmed that repair was not possible (after I sent the cartridge back to them) and the best they could do was offer me 20% off on a new cartridge. I definitely wasn't going to go down that route again - I tried to get the 20% discount on other Zu products, but was told that the offer was only good for cartridges. So, worst $1100 ever spent. I know accidents like this are isolated incidents, but it does happen. So those of you that are looking into the Zu modded Denon's - keep this in mind.


Since I didn't have another spare cartridge, Steve did send me one of his modded Denon's with a wooden body and elliptical stylus. The VAS cartridge sounded warmer and better than the Zu cartridge and at half the price. To those that are in the market for modded 103's there are tons of options out there - I would recommend giving VAS audio a try before pursuing the more expensive Zu Audio or other cartridges that use epoxy as fillers to add mass. This way if something goes wrong, at least there is the option to repair the cartridge.

128x128rdk777
big_greg
6,567 posts
 
I've seen those Zu cartridges and never could figure out why they were so much more than other DL-103 carts.
I wouldn't buy one. The only reason I have one is because it came with a turntable I bought. I have to say though after Andy Kim worked his magic on it it's pretty sweet.

rdk777's avatar
rdk777 OP
568 posts
 

Zu does modify the Denon 103 and brands their name them for a premium (~ 367% in this case). Well I guess that clears them of any maintenance type issues that one may encounter. While that seems to be okay with most people, I (along with @billwojo) have a hard time accepting that – but it is what it is. Again, my point is that this is a design flaw that has to do with the epoxy potting used in the Zu modded cartridges. My cartridge probably winded up in a landfill – I never got it back and never asked. 

I have indicated that my experience is an isolated incident, but it can happen. Had I known about the issues with epoxy potted cartridges, I may have gone down a different path or just settled for the standard grade. It’s quite a zinger to lose $1100 just like that. I’ve learned and have a microridge retipped 103R (by VAS) with excellent results. I will likely not have to throw away the cartridge should one of the channels go bad. There are better choices out there for 103’s and other cartridges in the ~$1k range.


dover
2,188 posts
 
Cartridges are a disposable item, you should only spend what you can afford to throw away.

Secondly, a lot of these modified Denons are a joke. All they do is put a new body over the top, but at the end of the day the cartridge is still connected to the tonearm via the flimsy plastic base under that shiny flashy new body shell. I mean you could just as easily glue some flooby dust to the standard cartridge.

Or you could nude the cartridge yourself - just cut an aluminium/spz/magnesium/titanium plate, whatever your poison, drill 2 holes to match the headshell, pull the body off the cartridge and epoxy or superglue the guts to the plate

Cant make silk out of a pigs ear though.
big_greg
6,567 posts
 
Zu does modify the Denon 103 and brands their name them for a premium (~ 367% in this case). Well I guess that clears them of any maintenance type issues that one may encounter. While that seems to be okay with most people...
Even companies that actually make cartridges don't always re-tip them.  Why would you expect a company that doesn't make cartridges to have the skill set or the parts to be able to re-tip a cartridge?  Why didn't you contact Zu first if you thought they would re-tip it?  You sent it to VAS because you already knew that.  You realize that modifying other manufacturer's products usually voids a warranty?  Not that you breaking the cantilever would be a warranty issue.

It sucks that you're out a thousand bucks because of your carelessness, but why are you all mad at Zu about your mistake?  It's not that I'm "OK" with Zu not being able to do "maintenance" on the cartridge, it's more like why not be mad at the person that broke the cartridge?

Personally I wouldn't buy a Zu Denon because of many of the issues brought up in this thread - the cost, the epoxy in the body, and the fact that they don't actually make it.  They do have a lot of fans and I really like mine after it was re-tipped by Andy Kim, but you're taking a risk the moment you buy something that is "modified".



chakster's avatar
chakster
6,144 posts
 
Buy Zu Audio speakers and cables, some of them are excellent (Made in Utah, USA). Best customer support from the manufacturer, great return policy (full refund guaranteed for their own stuff).

Regarding cartridges: just shop elsewhere, buy from the manufacturer (or dealer) and ask for return policy before you pay for it.

In high-end business many companies use the same business model. You can buy cheap cartridge generator from one company in a new fancy body from another company for x4 price. 


More to discover