OK - Now What…?

As long as free advice is being given out, as soon as your done with the Sea Bass ala Ben, check out Darwin speaker cables. I think they still have the lowest capacitance in the market at 7.2pf/ft, which accounts for their speed and openness. 

They don't believe in the myth that cables are tone controls and should just get the heck out of the way of the music. Practically everything else out there is just a variation on a theme. 

There are vendors at audio shows that only use their cables so their stuff sounds good. Check out their design philosophy at their site and there's really no mumbo-jumbo, just how they see things and a peek into how they build them.

All the best,
Nonoise

Hello,
Where are the two JL Audio F110 subwoofers?  I know a lot of people ask “How can that improve my speakers that go all the way down to 20hz?  I swear it can. Hook them up and set the crossover at 60hz. You can get wireless kits for better placement. I just received 2 of these and the JL Audio CR1 subwoofer crossover. 
It will blow your mind. It should for $10k. If you want to try out some subwoofers and you live near the Chicagoland area this store lets you try before you buy. https://holmaudio.com/
Also, For the fun of it try the Puritan PSM156 power conditioner. You can compare it to what you have. Then you can sell what you have because you will buy this power conditioner. Maybe start collecting albums again. When you get to 50 or 100 you can do some TT research. I’m going Linn Axis with a Dynavector 10x MC cart until I get my VPI Prime 21. 

Uptone Audio Ether Regen $640.

@jomonhifiI agree that relative to to your Integrated amp and speakers, your DAC and cables are the weak link in your audio chain.
Digital audio and especially DACs are sonically progressing very rapidly. Triode Wire Labs cables have great price/performance, but are below the performance levels of your audio chain. Both should be upgraded for best sonic gains.

Also, you might want to update your conditioner. I’m not familiar with Transparent’s conditioner’s performance but it seems like older tech. Power conditioners performance have also improved significantly in the recent years.

If possible, look for vendors who offer a free trial. Another option is to buy used- you can save $ significantly especially on used cables. You can resell it later without losing much $.

If you want to get back into vinyl you should start another thread of seeking advice. You’ll need to address turntable, tonearm, cabling, cartridge, and phono preamp/stage. To match the quality of your amp+speakers it can get expensive depending how far you want to go. You can get a nice sounding vinyl chain for a few $thousands, but if you want the “fool you as real” sound you’ll have to spend significantly more, >$10k+.  
Also, if you get an high quality transparent vinyl chain you should consider an $1-4k ultrasonic vinyl cleaner which is considered the best way to clean vinyl.  YMMV

+1 @chorus

Uptone Audio Ether Regen $640.

Should be an obvious uptick in sonic performance.  YMMV.