Neither of those things will affect audio quality. Save your $$
- ...
- 25 posts total
A dedicated line if possible 20 amp awg 10 lower resistance , and a 4 wire ,dual ground much lower noise , one is common ground , the other is a isolated insulated ground which for sure lowers the noise floor my Audiophile friend is a master electrician and we tried 3 wire ,then 4 and silver contacts on 20 amp breakers hard to find he had to source them took a month,and order $60 each x2 vs stock Copper $12 each silver breakers much better acoustically copper needs to be changed after 5-6 years due to pitting oxidation ,silver, silver oxide actually is fine.and a solid Copper gold outlet |
Dave Elledge's P.I. Audio UberBuss is not only the best power conditioner out there but it is extremely fairly priced. piaudiogroup dot com I also changed my outlet receptacles to Dave's Graphene treated, upgraded P&S Hubbel; 5362A UberPuerto receptacles. To the poster who said a p.c. will not affect audio quality, I say Bunk. It reduces noice and the U.B. can provide unlimited current with a power factor correction of 1. There are no surge suppressors inside and the outer box is non-metal to avoid Eddy currents.I had a Seimens FS140 whole house surge suppressor installed. The power cable to your power conditioner is THE most important power cable in your system. I bought a Moneoone Supernova for my UberBuss. I have a 32A Neutrik connector on the UberBussand Supernova and the Supernova will be plugged into a dedicated 30A line. |
- 25 posts total