Rega P3: Neo PSU or New Cartridge?
undefined ... I agree with your observations. The runout on the GT subplatter is so much tighter vs the plasticky stock one and that alone helps in a better more defined sound. I noticed that the surface noise dropped dramatically as well. The NEO does all of that while doing its job. There`s a number of threads about the NEO on the Steve Hoffman forum that you might want to check out |
undefined..... A friend of mine is farther along the same path that you are on. He has the same table with the same upgrades. He has the NEO PSU and he also bought an aftermarket linear power supply (sorry I don't know the brand or source) for the NEO to replace the wall wart that comes with the Neo (this does require another IEC equipped power cord). He has a Clearaudio Performer V2 cartridge Also, he has a Herbie's Audio Way Excellent II platter mat (I recommend it). Each of these were done one at a time and each step was a definite improvement. There are many people here that are better able to advise you on a cartridge for your table and arm combination than me but, I suggest that you not get too far ahead of the limitations of the arm with your cartridge choice. Should you put a $750 cart on a $600 arm? My tone arm cost about three times the cost of my cartridge. |
@scm Thanks for the heads-up; I’ll check those threads out! @mwh777 I have been thinking about putting one of my cork mats on the P3, but I want to get a spacer for the tonearm first. I agree with you regarding the cartridge-tonearm combination. I don’t intend to move into MC anytime soon, and the Ortofon 2M Black has been a cartridge I’ve been wanting to get for one of my SL-1210GAEs for a while now (I think the two have good synergy). I just figured that once I get the 2M Black, I could try it on the Rega. However, I’m leaning towards just putting an Exact 2 on the Rega instead because I abhor the tedium of cartridge alignment, so I want to do that as little as possible. I’d say a $600 cartridge on a $600 dollar arm is at the upper-end of reasonable. |
I have taken a stock Rega Planar 3 (2016) and added the following components (I will include the orice of same so that you can determine if these upgrades are for you): Base REGA Planar 3...................................... $ 995.00 Groovetracer Reference Sub-Platter................$ 275.00 Groovetracer Delrin Platter...............................$ 350.00 MCM Tech Sorbothane/Aluminum Feet............$ 129.00 REGA White belt...............................................$ 39.00 REGA Neo PSU power supply..........................$ 395.00 The total investment for my Planar 3 was $2,183.00.....The base Planar 6 is $1,695.00. The $488.00 difference in price with the upgrades has helped me create what I dub a P7. Hearing them side by side, I am delighted with the upgrade path. Groovetracer is a serious company. The SIngle machined Sub-Platter and NEO PSU made the biggest difference and my table more than holds its own against any other $2000 TT available. Adding the Rega ANIA Pro Cartridge sealed the deal. At $3,200.00 with a top quality cartridge it sounds awesome and close to the P8 (which is 3995 with Ania Pro MC aboard) I was coveting, though I dislike the unfinished skeletal path and the need for a fully closed unit with plinth and dust cover was required for my kit set-up. Ultimately, you can buy a Planar that is 90% of my table as configured and plug n play. But The path I chose was gradual and fun -- listening to the subtle changes as I replaced and added these upgrades was part of the audiophile journey for me. Other knowledgeable fellow audio aficianadoes will propose a different path. Ultimately, my next REGA model leap will be to the P10, but I am very satisfied presently. Good luck in your REGA upgrade path.
|
