2. digital
  3. 169580-96030

RME ADI-2 fs DAC: Not Loving It

I took the plunge about 6 months ago and replaced my Peachtree DACiTx with ADI-2.  I got the DACiTx to play files via computer and from my old but beloved JVC XL-Z1050 CDP.  

Can't say that I've noticed a marked improvement using the RME over the Peachtree. 

I picked the RME because of the glowing reviews and the fact that it had DSP.  I'm 61 yrs. old and last time I had my ears checked I haven't really lost much in the high freq's. But, I thought that it was inevitable that I would and the EQ that RME has may be a bonus.

In reality, it is not very user friendly and I'm no techie.  I thought by playing with it for a while it would get easier but really all I want to do is listen to music.

I'm no longer using a computer but a Bluesound Node 2i for my files and also use Tidal.

Not really a headphone guy but thought it would be nice to have the option seeing that neither of my preamps have a headphone jack.  I was only using my headphones with portable devices.  

I have mostly listened to vinyl over the years but really wanted to upgrade my digital front end as I'm getting lazy in my old age. 

The rest of my system :

Preamps: 
Classe CP-50
Rogue Audio Model 99 Magnum

Power Amps:
McCormack DNA-0.5 Deluxe Edition 
Black Ice Audio Fusion 3502P

Speakers:
PBN DP's
ACI Titan II LE subwoofer

Still using the JVC as a CD transport.   
I usually mix and match tubes with solid state.  Right now I'm using the Classe Pre with Black Ice Audio tubed power amp.

The RME sounds rather neutral, lean and dry to my ears.  Nothing exciting.  It doesn't make me sit up and take notice like when I first added the Peachtree to my system.  I was like wow! This is what I been missing all these years.  So, I thought the RME would be a significant upgrade over the Peachtree.  So far, not impressed.  Maybe if I was headphone guy?  Can't comment there other than both headphone outputs work.  

Any suggestions on what to try or what direction I should take next? 
nicktheknife
adg101
1,063 posts
 
A lot of people speak highly of the Cullen power cords. I know before I upgraded the switch power supply I first upgraded the power cord and it made enough of an improvement it provoked me to change the power supply next. I’d strongly recommend changing out the $2 power cable that came with the RME. I’ve not tried the Cullen’s but many here rave about them and they’re affordable. If you don’t feel it helps I doubt you will get hurt selling it or possibly you have a Blu-ray play or your Node uses the same C7 plug. I have a Bluesound Vault 2 which I upgraded the PC and recommend you might want to do as well. Try just the one PC and go from there.

Are you hardwired on your Node or only going WiFi? Ethernet direct does sound better so change that too. More cable advice… Supra Cat8 - it’s affordable.

Good Luck.

https://www.cullencable.com/c7-power-cable/
nicktheknife OP
194 posts
 
Thanks adg101. I got a little confused and thought you were referring to the ADI-2 power cord. I did upgrade the pc on the Bluesound. I am currently using an AudioQuest NRG-Y.
I would have to have a pretty long length on that Cat 8 cable. My router is in another room.  I'd probably need at least 30 ft. 
douglas_schroeder
3,281 posts
 
The affordable wonder-DACs are not, a wonder, that is. They can vary radically in performance between systems. Typically a system has to be changed several times to maximize the introduction of a new DAC. In some cases the system is superb with it. More often, much work is needed to optimize the sound. Perhaps in half the cases the sound never is worth all the effort. That is the reality of dealing with unknown/hyped DACs. Most components, really. 


nicktheknife OP
194 posts
 
I'm using the hardwired Ethernet connection on the Node. 
Cat 5 though. 
nicktheknife OP
194 posts
 
@douglas_schroeder  
It's funny that I never had a problem with my analog rig. Whether I changed a cartridge, phono stage or turntable. Yes, I have used a cartridge that wasn't a very good match with my tonearm or phono stage but it was still engaging. I wonder if I should maybe try an r2r dac. A friend of mine has a PBN dac. The power supply is massive, rack sized.  It was over $5000 and that was used from Audio Station in Bartlesville, OK. They deal in a lot PBN equipment mostly used.  I think he sent it in to get a usb input installed. It didn't originally have one.  And I think it's 24/96 max. He bought it only about 4 months ago. 
More to discover