Thoughts on moving from a 1200G to Sota Saphire or above
I should have made myself a bit more clear. The ground wires on the IC's are more or less used to reduce AC induced hum. As Chakster said shielding is important in helping reduce radio signals and other electrical noise pollutants from coming through your speakers. Thank you too, Jim. Your input as well as advice are always helpful! :-))) |
Hey Chakster, I was actually looking at those Zu cables this week. They seem reasonably priced and I like the return policy. Speaking of return policy, I’m probably going to order a cart from Music Direct because I can return/exchange a cart if I don’t like it. I’m targeting a brand where I can get the cart rebuilt by the company when it wears out. In my price range it’s the Van Den Hul Frog, Soundsmith low output and the Kiseki Purple Heart. Also open to options under $3K. |
Mrm, I tried to answer the question you seemed to be asking. Incidentally, all hum is AC by definition. I inferred that sometimes you can reduce hum, if hum is a problem, by NOT grounding the TT/ tonearm to the phono stage. Also, note that the trade off for shielding is increased capacitance. The first thing I would want to try is low capacitance unshielded cables that are kept as short as possible between the tonearm and the phono stage. It is not a given that every unshielded cable will bring in RF interference. That is something you can experiment with in your home environment. If you can get away without shielding, then you have reduced the total capacitance of the cable, for any given length. |
Like these https://www.kimber.com/products/carbon-int |
