2. misc-audio
  3. 169932-104649

Fuses

I’ve read of views on whether amp fuses impart any sound quality or coloring. I had a recent experience that has made me re-think my views (fuses do not affect sound) and wondered if others had a similar experience. 
I have a Line Magnetic integrated amp. After heavy regular use for over 5 years, one day it just wouldn’t power up. After checking the power supply, I assumed it must be a blown fuse. I recalled that Line Magnetic sent with the amp two replacement fuses of the same type/quality that was pre-installed. I dug out one of them from storage, replaced the fuse and the amp powered up normally. 

What surprised and delighted me was the change in sound with the replacement fuse. Fuller bass, more detail and more warmth. I have rolled the tubes several times in the amp, and am attuned to the subtle changes that can make. Popping in a fresh fuse seems to have had a similar affect. And these appear to be cheap fuses, available for a few dollars at most. I don’t think I understand any of this. 
bmcbrad
yuviarora's avatar
yuviarora
537 posts
 
They were 0.1uf
I tried 3 different capacitors.
From everything I have read, .01uf is the value that is best used for bypassing.
Larger values can cause coherence issues, which is exactly what I experienced.
I’ll give them a shot, hopefully they work out.
Thanks for your input.

P.S. @millercarbon Take care of yourself and your family, things are about to get pretty rough out there. 

georgehifi's avatar
georgehifi
10,312 posts
 


Sorry George,
I can’t take anything you say seriously. You have blown all your credibility with me, and at this point I am more inclined to thinking that bypassing capacitors is a good idea just because you stand so vehemently against it.


Don’t be sorry, it’s obvious from that reply, that you have no idea, don’t wish to know what’s correct, and only hope what your dreaming up will come true.

Check out any hi-end equipment, amps or speakers, dacs, phono stages etc etc any sources and SEE IF ANY CAPS IN THE SIGNAL PATH are by-passed with another different cap. And you’ll find the answer is no, as to use 2 different time constant components in parallel in the signal path will only create distortion/smearing of the signal.

The only time this will not happen is if both caps are identical in all parameters, make, voltage and uf.
And you won’t get anyone here that knows what’s what, saying anything other than that.

Good luck🙏
millercarbon's avatar
millercarbon
12,531 posts
 
georgehifi-
Sorry George,
I can’t take anything you say seriously. You have blown all your credibility

George posted this. So even he gets it. Please go away now. Please.

Seriously. Please. Go away.
oldhvymec
5,101 posts
 
VTL and the old Marantz both use (frequency collection (bypass)) caps, I’ve seen more than one older Mac with FC caps too. .01 usually. Doesn’t change anything but ADDs a twinkle if you add one or two in parallel.

A really good PIO with a FC cap that’s a copper foil (no oil) or teflons.

I like V-Cap.

Teflons and silver foil both are like razors, I don’t care who makes them..
Takes forever to break them in. But they are really worth it.. Copper foil, or with oil. I’m not so sure. I’ve been running them for a while.. We’ll see. Teflon/alu foil, copper or Silver foil caps.. $$$$. They are non magnetic too.

I match the voltage too on the FC cap. That can cause issues in a passive crossover, I’ve done that and it does cause a timing issue.

200vac with a 600vac cap won’t work correctly.. 600 and a 630 is a lot better.. 200 and 200 :-)
yuviarora's avatar
yuviarora
537 posts
 
Thanks for the info. Much Appreciated.
I just got (4) .01uf Duelund Tinned copper foils. I’ll bypass both the mid and the tweeter caps on my speakers.
Sadly no Duelund Silver foils were available anywhere, they might have been the better match with my Mundorf Silver in oils.
All the capacitors in my mids crossover are 600v, tweeters are 1200v and Duelund bypasses are 600v.
Fingers crossed. 
More to discover