Describe the sound of point source loudspeakers?


I have not heard any but I’m going to audition some in the near future. Can you provide any pointers or things I should be listening for? My current loudspeakers are von Schweikert db99se and they are definitely not point source. Thanks for your input.
tuberist
Tuberist, your Schweikerts are most definitely point source loudspeakers.

The vast majority of speakers are point source. How a speaker radiates into the environment has to do with the speaker's size in relation to the frequencies it is responsible for. The other major category of loudspeaker is "line source." Line source speakers are taller than the wavelength of the lowest frequency they are responsible for. Examples are speakers like Magneplanars, Sound Labs, Pipe Dreams and those big systems you see at stadium concerts. 

Line Source speakers radiate acoustic energy into the environment more efficiently. Volume levels drop off at the cube of the distance with point source speakers but only at the square of the distance with Line source speakers. This is why line source speakers are used at big concerts.

The way line source speakers image is distinctly different. Point source speakers create a small image even if they are huge speakers. It is like sitting at the back of the concert hall. Line source speakers create a large image, like sitting up front. Some people think it is larger than life. 

Line source speakers also have other advantages. They do not radiate up or down which helps limit room interactions. It you make them dipoles they do not radiate to the sides either.

The big disadvantage of line source speakers is size. For them to operate as line sources full range they have to be floor to ceiling tall. Most line sources sold for residential use are not full range. They convert to point source in the bass. 

There are only two dynamic driver line source speakers that I know of, Bob Carver's Ultimate Line Source and a kit that Parts Express sells or was selling. They may both be out of production now. The Near Field Pipe Dreams are long gone. To do this with good drivers is a very expensive project. The tweeters have to be stacked very close together. The magnet structures are usually too big to allow this. 
Listen for the same things you'd prioritize on any speaker; natural tone, macro & micro dynamics, high and low freq extension, sibilance, integration of the drivers, soundstage, imaging...but most of all natural tone and dynamics. Cheers,
Spencer
It is difficult to describe but I'd say you could look for a near seamless integration between bass and treble.

My Tannoy Dual Concentrics are far from perfect, but they do have a sense of integration that is remarkable for speakers of that size.

Many would say that the distance between the centre of the treble and bass units doesn't matter if you are listening at a sufficient distance, but I'm not so sure about that.
@tuberist, to reiterate - "  Tuberist, your Schweikerts are most definitely point source loudspeakers. " - @mijostyn's opening line ... do not underestimate the db99se as a well integrated Loudspeaker System!
While Coincident Drivers are referenced as an ideal ' Point Source ' design - challenges in implementation abound.
Don't shoot yourself in the foot by giving up 99 db Sensitivity.
A suggestion ... try a different integrated ... like VAC or Octave for example.
Another audiophile version (of many such tales on this forum) and as current as the original: "The Emperor’s New Clothes"

Point source speakers create a small image even if they are huge speakers. It is like sitting at the back of the concert hall.