Tweeter Replacement for Acoustic Energy (UK made) - AE2's and AE5's


I have a pair of each AE2's and AE5's - circa 1997.  Both had SEAS - The AE5's Original was 25 TAFCD/W AE - H 849 8ohm The AE2's had 25TACF/W-AE which AE said a few years ago to use the 27TBFC/G - H1212-06 - which I did replace in the AE2's, acquiring from Madisound here in the USA, yet had an issue with one so I want to replace both again, plus the AE5's.
My recent communication with AE, they are stating they can now provide all replacements, yet pricing is high, plus they said the AE2 tweeters would need a component change to the crossover, which they would supply.  AE is not providing specific info on the replacements as they want me to go through them, moreover there Replacement cost's quoted are very expensive, furthermore the crossover component change with the AE2's complicated the situation even more.

Originally, a few years ago I was looking to upgrade all Tweeter's, even with a different manufacture other than SEAS if necessary, yet continued to be told the H1212-06 was the best solution.

Now with the higher pricing from AE Direct, I have been extensively researching options to no avail due to all the variables to properly match and maintain, if not improve the total high-end performance these speakers provide.
Any comments, sources or suggestions would be Greatly Appreciated. I Thank You in Advance.
jweilers1

Hi. Found this thread and was curious where in the US I can find the drivers for AE2 series 2. Or the refoaming kits. 
 

Thanks. 

this was in my last post..  madisound.com.        Prior to that their recommended replacement was:
SEAS Prestige 27TBFC/G (H1212) Aluminum/Magnesium Dome Tweeter.
Which I purchased on 2/6/2019 from Madisound.com in the USA  @ $51.80 each USD plus shipping..

Hope this helps.

Thank you Jweilers1. Perhaps I misunderstood. I was talking about the woofers. It seems like you addressed the tweeters in the above posts. 

Wow, Woofers are a whole another deal.. AE has different ones and used to make them handmade 4ohm and 8 ohm based on your crossover.. within youyr specific unit.. and year it was made.. feel free to email me if you want a whole bunch of detail and we can talk by phone.. too much for me to type and help out since I two finger type, yet am Willing to Help you in Every Way.. Jon.    jeilers@me.com

Hi, Did You found out how to make the required changes to the crossover when using the SEAS Prestige 27TBFC/G (H1212)?

Regards, Jonny