Noisy ethernet cables

@erik_squires , I would have more faith in a lower cost, higher volume product from a lesser vendor, that has the proper equipment for testing, and probably more experience, that a boutique vendor who in many cases is winging it.

I am not saying that is exclusively the case, but measurements by Stereophile/ASR have shown enough "high end" equipment to have questionable performance, even on the basics, that I have some confidence that is correct. I would expect the larger high end vendors to be designing "properly", at least I would hope that is the case. Fortunately, this is an easy one to test. Measure the resistance/capacitance from the Ethernet jack -shell to the case.

Also, to be clear, I'm less worried about noise getting INTO an Ethernet cable as much as it radiating to audio signal cables.

@erik_squires ,

With the twisted pair, you wound need to be running them pretty close. Packet bursts could demodulate to audible frequencies so there is a mechanism for the noise transfer even if the transmission frequency is high. I suspect this would be not much of an issue at 100M or 1Gig, more at 10M though since those high frequencies would be too high to even be demodulated as bursts at the power level.

cindyment - simply not true, demodulation can occur. Erik knows radiated energy is the biggest concern in audio. Best wishes.