Photos of the Nenuphar V2 in a room in New Zealand, courtesy of Mono and Stereo.
Cube Audio Nenuphar V2 In Room Photos
[Note: it appears the 'spec' information shared is from Cube Audio's site and is for the V1]
Cube Audio Nenuphar Single Driver Speaker (10 inch) TQWT Enclosure
----------------------------------------
Parameters (from Cube Audio):
Power: 40 W
Efficiency: 92 dB
Frequency response: 30Hz - 18kHz ( 6db)*
Dimensions: 30 x 50 x 105 cm
Weight: 40 Kg
Photos of the Nenuphar V2 in a room in New Zealand, courtesy of Mono and Stereo. Cube Audio Nenuphar V2 In Room Photos
[Note: it appears the 'spec' information shared is from Cube Audio's site and is for the V1]
|
@paullb What is your reference / criteria for "nearfield" in your setup scenario? I find the Nenuphars work incredibly well nearfield [in my room]. In my current listening position, as I type, my ears are 7 ft measured on the direct diagonal to each driver. Some may find this ’nearfield’ ...others may not...room dependant. I’ve been as close as 5ft on the same measurement. |
@ David_ten perfect. I was thinking about 5 to 7 feet. Nearfield could be closer in a small room or a desktop type setting, but not for speakers design for 20-40m² rooms. 5 feet is as close as I would want to get. I bet your Imaging and depth of field are out of this world (I assume they are out of the room). |