New Parasound Halo JC1+ monoblocks just released!!!



Those trying to get the old JC1’s cheaper may want to wait as these new ones should reduce the price of the old one used. And look at these babies do current
Old Model New Model
128x128georgehifi
...However, the JC5 is a stereo amp, which I guess is relatively limited in delivering power and current comparing to monos, especially in low impedance.
Afterall, I am really expecting that the new JC1+ can combine the advantages of both. But $17k is not inexpensive. Just waiting for more feedbacks.:)

We’ll I’m fresh off a two week trial of the JC5 (really like it), previously had dual mono Cambridge 851w’s and the JC5 was a jump up in detail, depth, width and microdynamics. Can’t say anything bad about, actually is an amazing amp.

Wanted to run bi-amped dual mono JC5’s in hopes of greater sound stage separation and any other audible benefits (as with my 851’s) and at their price (10k) said "what the hell" and now have the JC1+’s set up.

I’ve only had a chance to listen to 20 minutes of music, and broke down the JC5, so I can’t jump back and forth. What I’m noticing right out of the gates is the deep detail the JC1+’s give in there class A operation. Just so much depth and texture brought out that I seriously never picked up on, or maybe more easily pick up on now.

However the power of the JC1+’s is kinda throwing me a curve. My speakers are 103" (L) and 112" (R) from my listening chair, and had with the JC5 my R/L balance set to 2db favoring the right speaker. Sounded fantastic and had great center imaging. The JC1+ has my left channel speaker really jumping out and overly favoring the closer speaker. I didn’t even touch my speakers while setting up the JC1+’s, but way over powering left channel now. I listen at a 0db balance and really like what I hear (minus the left speaker dominance), but when I dial over the balance to a more neutral sound now at 4db favoring the right speaker, I feel the overall sound feels restrained and not as vibrant overall as it was in a 0db.

I just need some more sit down time to really flesh it out more.

Innuous Zenith3+Phoenix USB, Musetec MH-DA005, Technics SU-R1000, JC1+'s, JBL L100 75's, Dual KEF 12b subs

@ja_kub_sz Hope all is well with you. I wanted to see if you ended up getting more time with the JC1+ and have feedback to share about the differences of those versus the JC5? 

@christianb5s4 

Well I have a completely different system now and a new house, and I'm gonna be completing a tube based system end of month.

But as far as the JC1+ go... I have them paired with my Focal Sopra No.3 in a large (18'x52') room.

As for the JC5 vs JC1+... I'm of the opinion now that it's all about your speakers, room size and listening habits.

If you have 90+db 8ohm speakers, listen at moderate sound levels, and have a small room, then JC5 would be all you need (95+% what the JC1+ offer for half the price).

However if you have hard to drive speakers, and want the most out of them then JC1+.

If I had my Sopra 3's with the JC5 I would just stayed put, I have 80 class A tube watts powering my Sopra's and they sound amazing, but again I have the Mola Mola Tambaqui now so that too changes things.

All and all... I really would say JC5's and spending the difference in price on the Tambaqui would bring more audio nirvana then the JC1+ alone.