Bel Canto opinions

should I plug it into my Furman PST8 or directly into the wall outlet?

Well, obviously it’s easy to try it both ways and just follow your ears, but I’d be surprised if it doesn’t sound better plugged into the Furman. This a very different animal from your Sim amp and doesn’t require near the current and also seems to benefit greatly from using filtered power. But, you’ll find out either way. Don’t rush to judge as the amp will probably need at least 100 hours before it breaks in but might wanna check with BC on this.

Thanks Soix! I was truly shocked at the difference with my Sim amp going directly to the outlet and bypassing the Furman. But I know class D amps are a bit if a different animal…tThanks again man, I appreciate you taking the time to respond😌

Bel Canto is made in Minnesota and is best for money D's .

Often just the best , period .

You can certainly try amps with and without conditioner but in general it is often not optimal to plug high current power amps into a power conditioner unless it’s current delivery capability is up to snuff. Often it is not.

I use power conditioners on preamp and dac but not on integrated amp or power amps, both Bel Canto. Yours might be different but I find my ref10000m amps only draw a lot of current at power up. If I turn both on at the same time my breaker will usually go but never when actually playing no matter how loud.  I leave both Bel Cantos on most of the time as per manual.  They draw very little power normally when idle  

@kingbr I have the Bel Canto REF501S in my system and have had it for several months. Yep I know a guy who knows a guy.

You are going to love it. I have dedicated power to my listening room and no power conditioners. I agree with @mapman if you must have a power conditioners do not plug you amps or integrated into it.

Leave your 501S powered up at all times. I do with all my ss gear. 
 

Give it time to break or burn in and you are going to love your 501S.