thanks jc4659, yeah, I'll be patient, I know the deal on this as I have followed others break in notes.
Musetec (LKS) MH-DA005 DAC
Meanwhile, during the 4 years after release of the MH-DA004, LKS (now Musetec) worked on the new MH-DA005 design, also with a pair of ES9038pro chips. This time he used more of the best components available. One torroidal transformer has silver plated copper. Also banks of super capacitors that act like batteries, solid silver hookup wire, 4 femtoclocks each costing multiples of the Crysteks, a revised Amanero board, more of the best European caps and a new partitioned case. I can't say cost NO object, but costs well beyond. A higher price, of course. Details at http://www.mu-sound.com/DA005-detail.html
The question, surely, is: How does it sound? I'm only going to answer indirectly for the moment. I thought that the MH-DA004 was to be my last DAC, or at least for a very long time. I was persuaded to part with my $$ by research, and by satisfaction with the MH-DA004. Frankly, I have been overwhelmed by the improvement; just didn't think it was possible. Fluidity, clarity, bass extension. A post to another board summed it up better than I can after listening to piano trios: "I have probably attended hundreds of classical concerts (both orchestral and chamber) in my life. I know what live sounds like in a good and bad seat and in a good and mediocre hall. All I can say is HOLY CRAP, this sounds like the real thing from a good seat in a good hall. Not an approximation of reality, but reality."
- ...
- 1537 posts total
As @lordmelton wrote, the break-in of your Musetec is usually not in a straight line. Just keep listening and it will get there. There are some very fine, and expensive, capacitors used inside and I think those are the components that take time to sound absolutely right. I would not use the Musetec straight in to your amplifier section. You have a great integrated and you should use it for all it’s sonic benefits. Especially at low volumes, you will be sacrificing too much SQ. The Equi-Core "power conditioner," as you probably know, is not a power conditioner in the usual sense. It does not create new power, like the PS Audio units, nor does it "simply" filter the AC line as do virtually all the others. It changes the AC power lines in an unique way, supplying live power to the otherwise neutral line. Instead of the component receiving live, neutral and ground lines, it gets two live lines and a ground line. So it is possible that a particular component may not take well to that--I don’t really know. My suggestion is that you consult with Equi-Core, perhaps referring them to the informational page at Musetec to see if there is anything there that might not look friendly upon a "live" neutral line. Given that the Equi-Core is such an odd bird, I’m not sure that Musetec could be of any help. However, given what you have written, I would keep the Musetec away from the Equi-Core. |
@kclone @melm I doubt its the balanced operation of Equi-Core as I use BPT 3.5 Signature balanced transformer based pc with my 005. I suspect you may be overloading Equi-core, likely quite a bit of inrush current when going from standby to on with 005, recall these are supercapacitors and charge up at each start. If Equi-Core continues to operate correctly without 005 connected your Equi-Core isn't failing. You could try disconnecting another component from EC and see if that solves issue, feeding clean power to 005 is beneficial. |
- 1537 posts total