I hope you get some input on this. I've found that tonearm knowledge to be the most difficult to come by.
VPI Fatboys versus others in its' tonearm weight class.
In their never ending quest to push fiscally responsible audiophiles into bankruptcy, site members have succeeded in making me consider a new gimbaled tonearm to keep a Lyra Kleos company on a VPI Classic 2 turntable. Dover, on my previous thread, pointed out most other tonearm options would be limited on the Classic 2 short of major surgery to it. So here I am considering keeping the tonearm upgrade in the VPI family. Their gimbaled Fatboy, will readily fit onto the VPI Classic 2’s tonearm base without any fuss.
Here’s my question after reading up on the Fatboy. How does the Fatboy compare with other tonearms in it’s $4500 price range? Is it about average in that class, which would be acceptable, or is it much better or worse than its’ peers?. If you.ve had any chance to compare the Fatboy with other tonearms in the same price range, what is your impression? I don’t want to spend that much money on one if the consensus is that it’s at the bottom of its class, which hopefully it isn’t.
I haven’t had an opportunity to listen to one, or any other tonearm as expensive. I would likely need to arrange a two day road trip to accomplish that. In lieu, I’m soliciting your impressions as to whether the Fatboy is worth that much compared to others in it’s price range. I guessing it will be okay, but don’t want to spend $4500 if the consensus is it’s at the bottom of its’ class just because it fits easily on my turntable. So what do you think? I’m all ears.
I’m not looking here for alternative solutions to a Fatboy. That was the topic of my recent thread, I’m only soliciting your impressions of the Fatboy compared to other similarly priced tonearms, and why I should or shouldn’t take a chance on it. Thanks all,
Mike
- ...
- 82 posts total
Noromance, me too. I’ve found vey few reviews online about Fatboys either. One review was more or less glowing, the other more reserved in its’ praise, Other were more short and sweet, along the lines of "Here’s a great new product". I’ve yet to look through the annual product reviews or "Best of" lists like Stereophile or other audio mags run, so maybe something will show up there.I’ve also found a little bit in Audiogon and other audio forums, but not a great deal. The VPI Fatboys have been out at least a few years now, so somebody must have noticed them and have an opinion, Or maybe this thread can turn into a definitive exposition on Fatboys and their ilk in this price range. We’ll see. There’s a lot of expertise here, So hopefully this thread on Fatboys will take off tomorrow and we can both learn something here. I’d really welcome peoples advice on a major purchase like this. On the other hand I may get lucky and make an uninformed, but fortuitous decision. More likely not. Mike |
What Harry says should be discounted. This is the guy that said anti skating was detrimental. @skyscraper , It is a run of the mill gimbal arm certainly better than what you have and an easy swap but, it has deficiencies that would keep it from being an arm I would consider. If you want a more accurate assessment of what can me mounted on your table without much surgery take close up pictures of your tonearm base and if you can, the bottom side of the turntable and closeup of the area underlying the arm. The only measurement I need is your current spindle to pivot distance in mm please. Send them to me and I will give you a good idea of what can be done. From pictures I have seen It looks like it has a small removable tonearm board, very easy to copy. An ebony board would look killer. Any surface mount arm like the Reeds or the Tri Planar will mount easily if the length is right. It also looks to me like your current tonearm board is simply screwed down to the surface of the turntable. This means you can easily mount boards of various sizes and mount them using the same holes so no modification need to be done to the plinth itself. If you were to send me the old tonearm board it would take me about 30 minutes to make a new one. Shop time is $140/hour. The ebony would cost you another $30.00 |
I have never seen a VPI Classic but if what Mijo says is true, if you do have a removable mount, then why are we even here? You can have any tonearm you want provided the P2S distance is not crazily different from the OEM tonearm, simply by replacing the mount. You can probably acquire a replacement from VPI, or Mijo, or a sympathetic local machinist. And you won’t have to compromise the originality of the deck itself. |
|
- 82 posts total