Cube Audio Nenuphar Single Driver Speaker (10 inch) TQWT Enclosure

@larryi 

Have you heard the latest version of the Horning Aristotle Ellipse PM65. Spectacular! Love to compare it to the Cube Audio offerings. No resistors or inductors in the Horning.  Only one cap on the tweeter. True full range performance with outstanding speed and dynamics.  

@jonwatches1  You are welcome!  Keep us posted on what you choose. Reach out, should you have additional questions.

No, I have not heard the latest Horning Aristotle Ellipse.  I have heard other Horning speakers which are very dynamic and exciting sounding.  I do like their use of full range drivers as wide range drivers in multi-way systems.  Some of their systems sound a bit too bright or hard sounding for my taste, but, overall, I prefer that to the dead sound of most low-efficiency modern speakers.

Photos of Cube Audio Nenuphar speakers in a customer's home, courtesy of Mono and Stereo:

Cube Audio Nenuphar, system, room photos

david_ten

There is no such thing as a thread that only mentions one speaker. Already people are talking about Horning, Charney, Voxative, and whatever. Of course, people want to know how Cube compares to whatever.......this is what the game is about. Now, if the thread was titled....."Only Cube owners experiences, please"......then MAYBE you have a point.

Some people feel threatened by my comments on improving the speaker......and mentioning other speakers that are maybe way cheaper and could be alternatives........if you like feeling bad.....that is your choice. I suggest you choose joy no matter what the circumstance.....it feels much better and lifts everyone. My intention is to educate and inform......about audio and life.

In that vein, I will now mention a much better version of a Cube speaker.....an open baffle speaker you make yourself. You can buy the drivers in the US for something like $6,000 a pair delivered. You can take $500 worth of 3/4 inch 13 ply baltic birch plywood and 3/4 inch highly refined MDF and make a baffle 2 feet wide by four feet high. You also make wings that are one foot by four foot on each side going straight back (felt on the inside of the wings so the rear radiated highs will not bounce off the wings). You use the Birch for the front and rear and the MDF layer in between.....all baffles 2.25 inches thick. You mount the driver near the top of the baffle and use all my techniques and you will have way, way, way better sound than a stock Nenuphar......and on a baffle that is basically a four foot square folded back....you will have bass down to 40hz in your room. Of course, you will need a good sized room and the baffle has to be at least 5 feet from the rear wall. With all my tweaks plus the sound of open baffle (total elimination of box sound and rear radiation)........this would blow you mind. You can finish and shape the baffles any way to please your eye. The speaker wire would be wired directly to your amp from the voice coil wire......OMG. Total cost....less than $7500. If you do not have any woodworking skills you can hire some local woodworker for $1000 to make them for you with super finishing.

Drivers....$6K, Ground Enhancers $38, Bybee Clarifiers $220, wood and glue and screws $550......footers? Finishing? With a table saw and router you could build these in one weekend (without finishing).......you assemble and it sounds so good you wait for a loooooooooooooong time before taking the drivers out and finishing it......it will sound that good........Who will be the first to do this? Not everyone is conservative and just buys stuff. Way less than half price you have something way frickin better.

I will leave this thread for awhile and let you talk about amps and such......will check back later......maybe someone will try what I suggest and post here or start their own thread. Would be lovely if a Nenuphar owner built an open baffle version and compared.....really cool.

Of course, you can add supertweeters (some already have) and woofs......that is another story for another time. Have fun. Love is all there is.