Received The MC2000 Back From Expert Stylus Today


So I got the Ortofon MC2000 back from Expert today, and Mr. Hodgson did a beautiful job on this service. He fitted a new Paratrace stylus and made a minor repair to the end of the OEM cantilever. Looks as new, and there are no oddities to the stylus assembly. The Paratrace diamond is quite diminutive, barely able to be seen with my aging eyes. 

This afternoon I installed it on a very light Fidelity Research headshell, looks kind of like one of the Swiss cheese SME ones. Wired it to a T2000 transformer and then to a Graham Slee Accession. 

This is a remarkably detailed and neutral sounding cartridge. I have a few decent cartridges here and this is as good as any I have experienced. My system uses a pair of JBL 4365 speakers and a Halcro DM8 pre amp, so I have to be careful with system synergy as a too clinical component can push it over the edge. The MC2000 comes very close to doing this. I am considering a wood headshell like the Yamamoto boxwood, due to its low mass and its ability to add a touch of warmth/body to the overall sound. 

But even as it sits the transparency, the fine detail, the dynamic contrasts are all outstanding. I can tell after an evening of listening this is a keeper for me, and while its been a bit of a drawn out journey to accumulate the bits and pieces and get the cartridge serviced...well...it was worth every bit of effort. 

Yes I enjoy my Transfiguration, ZYX, and Ikeda, that is true. But I like the MC2000 every bit as much and I would get rid of a whole bunch of stuff before I ever parted with this cartridge. 

neonknight

True.  Which is why I haven't bought a current-drive phono stage for the MC2000; it's the only LOMC I own that would need it.  The box built for me by Dave Slagle actually is nominally current driven, but its input impedance is higher than the output impedance (2 ohms) of the MC2000, so actually it operates in voltage drive mode.  The way I think of it, the cartridge drives the phono stage, not vice-versa.

@nandric 

Yes that is the box I am referring to. I don't think I can be any clearer, its ALL the OEM packaging that was provided when you bought it new. I even have the lapel pin. The only item I do not have is the Ortofon RCA cables that were provided with the T2000. I have a cardboard box that held the cables, but not the cables themselves. Otherwise I have everything else that comes with the MC2000 and T2000. 

I know a retired dealer who used a MC2000 in a top end LP12. I heard it and it sounded very good. Detailed but a little thin and bright in the upper mids for my taste. He has since changed to Garrard 401 and Decca cartridges with claimed musically superior results. Coincidentally, that's what I run too. 

Dear @noromance  : Normally cartridge quality level performance is dependent of the whoile audio system. I don't like the Linn TT and ceratinly the 401 it's better with the rigth tonearm.

"  Decca cartridges with claimed musically superior results. .."

Decca and MC2000 are way different performers and that " musically " reference you post speaks as an audiophile preference and not necessary about MUSIC because MUSIC is not " musically ", this term is an audiophile one.

Btw, that " hin " characteristic you listen it is not intrisecal to the MC2000 and speaks more that the used tonearm was not really a good cartridge mate.

In the other side,that vintage cartridge is really good but I can't say excellent as is the Etna SL or other today top cartridges. MC2000 is not an easy cartridge to achieve its best quality performance, it goes against what in analog we already learned: it's extremely low output, heavy cartridge and way high compliance. Certainly not " user friendly ".

 

R.

 

 

Pursuant to what Raul says about the MC2000, in his review of the MC2000, back around 1990, J Gordon Holt remarked that if one were to adhere closely to the guidelines about resonant frequency (8 to 12Hz range), the MC2000 would have to be mated to a tonearm with effective mass of 5g, because of its heavy weight and its very high compliance. (I know Raul is tired of my repeating this story; sorry.) Holt loved the MC2000, despite those warts. Ortofon never repeated themselves in terms of marketing a cartridge with such a high mass and high compliance. However, some of the latter day Audio Technica LOMC cartridges come close, although they are lighter in weight and slightly lower in compliance, which makes them much easier to deal with.