Thiel Owners


Guys-

I just scored a sweet pair of CS 2.4SE loudspeakers. Anyone else currently or previously owned this model?
Owners of the CS 2.4 or CS 2.7 are free to chime in as well. Thiel are excellent w/ both tubed or solid-state gear!

Keep me posted & Happy Listening!
128x128jafant

Good day to you all..

I'm having a problem getting my hands on Mills resistors 12 Ohm @12W.

The sender has given me a very long list of other brands..

Anybody here recommend a substitute for the mills at same price range and sonic performance?

Thank you

 

 Pieter

 

@pieper1973

Are you in the US? Sonic Craft is your friend. They stock MRA-12s in all the values used in the CS2.4 although you do have to mix and match the old Mills (brown body) with the newer Vishay-Mills (black body). Fast shipping, fair pricing, and excellent service. IIRC, I paid for the mid-grade level matching and they gave me the full set measured at better than the top-grade level matching.

If you are really stuck, the only thing comparable, from my extensive research, is the Ohmite. Wilson uses Caddock but I could never figure out anything that would be suitable in the CS2.4. If you have really deep pockets, you might try Path or Dueland graphite resistors. People say they are the best. They better be at those prices - 5-8 times the Mills! At that’s if you can get the correct resistance in a single resistor. You have to get really creative running in series/parallel to get the proper values. Other than Mills, those are your choices. Otherwise, just keep the OEM resistors.

Adding to Beetle’s excellent summary, here’s a cheapskate trick for the Thiel resistors that you might keep.

Turns out, a big part of those resistors’ ’sonic problem’ is the thermodynamics due to their mounting. They are non-inductive wire-wound with current flowing around their coil circumference, dissipating into the ceramic body. The bottom of that body is glued to the panel, creating a large differential in wire heat distribution. Solution is to mount that same resistor on an edge rather than a flat. Put the edge on Mortite / BluTac pads for even better results. Cheap fix, much of the improvement of Mills, suitable for woofer and midrange. Spend your savings on a Path, etc. for the 12Z tweeter feed.

Nice tweak, @tomthiel Curious to hear the back story on how you discovered that.

@pieper1973 you have CS2.4, right? Why do you want 12 ohms?

Also, I forgot to mention one of the Mundorf lines is comparable to Mills . . . It’s a re-badged Ohmite.