If you are looking in the 2000.00 price range, consider the SPL Phonos. It has plenty of loading options for MC cartridges and capacitance settings for MM. Plenty of gain for even the lowest output. This is a fine sounding phono preamp IMHO.
Is a separate phono pre really necessary?
I have an upgraded Rega P3 that is now essentially a P6 (groove tracer subplatter and counter weight, Rega Neo ps) that has a Soundsmith Zephyr MIMC star mounted on it. It is then connected to a Park Audio Budgie Ten SUT and then to a Rogue Audio RP-5 preamp.
This question is about the phono stage in the RP-5. Would upgrading to a separate phone preamp of around $1,000 to $2,000 be a worthwhile upgrade from the internal phone preamp in the RP-5? And if so which phone pre do you guys recommend (notwithstanding all the caveats about subjectivity). I'm thinking of the soundsmith mcp-2, PS audio stellar phono, parasound jc3 jr., maybe a Manley Chinook if I can find a good deal.
The wrinkle is the loading requirements for the zephyr mimic star: >= 470 ohms. This makes a lot of phone preamps really not suitable for this cartridge (hence premaps with adjustable loading via a pot) because of the static loading options are mostly well below 470 ohms on most phono preamps
- ...
- 40 posts total
Another vote for the Hagerman Trumpet MC.
In the past, I've had noise and hum driving MC carts at 60db...even with an outboard linear power supply.
The Hagerman Trumpet MC is quiet. I recently tried an AT33PTGII at 68db gain. Quiet...and very punchy. I now have dialed it back an run it at 64db.
One of the best things is the front panel-mounted control knobs for load and gain. This is so important to go back and forth between settings to hear what works best.
I'm hearing that the Hagerman is embarrassing near to the Herron VTPH-2A at less than half the price.
It's a very organic, full, tubey presentation with stock tubes and responds well to tube rolling to tailor the sound to your needs.
|
@elliottbnewcombjr The review you linked to was one reason why I'm going down this path. NG impression of the RP-5 phono stage has been mine as well. I thought a SUT would help; it has but at the cost that was pointed out in the review (and the loss of shine and sparkle that @bkeske mentioned). |
- 40 posts total