2. music
  3. 1078448878

Whats on your turntable tonight?

For me its the first or very early LP's of:
Allman Brothers - "Allman Joys" "Idyllwild South"
Santana - "Santana" 200 g reissue
Emerson Lake and Palmer - "Emerson Lake and Palmer"
and,
Beethoven - "Piano Concerto No. 4 in G Major" Rudolph Serkin/Ozawa/BSO
slipknot1
big_greg
6,656 posts
 

Fever Tree - S/T

bkeske's avatar
bkeske
5,597 posts
 

@noromance 

Agreed. 12BH7A (CV5042) can be great. Curious if the Trumpet could facilitate it.

Doesn't this rely on the power supply? As I am running the SBooster LPS, it is capable of 2.5A @15v, the stock Hagerman w/wall wart was designed for 2.05A @15v. So, as designed, the SBooster (in theory) has more current available than the Trumpet was designed for, which is good. But, may not be enough for 12HBH7A's if they call for 3A.

I might have this all wrong, just learning here. From what I am reading, it is the power supply that could be damaged by not being able to provide enough current, (in my case), not the Trumpet itself.

noromance's avatar
noromance
9,860 posts
 

Brian, on the Trumpet, it all depends on the internal capacity of the DC regulator feeding the tubes on the board.

noromance's avatar
noromance
9,860 posts
 

@gardners501 Streaming Aaron Copland. Nice.

bkeske's avatar
bkeske
5,597 posts
 

@noromance

Brian, on the Trumpet, it all depends on the internal capacity of the DC regulator feeding the tubes on the board.

Gotcha. I think I was wrong anyway. 300ma is .3A, not 3A. So, not a huge difference really. I would have to check with Jim. Jim includes the schematics in the manual, but it is beyond my knowledge to know if the capacity is adequate

More to discover