Linlai E 6sn7 tubes


I just placed an order for a pair of these for my Aric Audio Motherlode II.  I’ve been chatting with a fellow that runs the E 6sn7 in his Don Sachs pre. He loves them, He says they make his NOS tubes sound thin and lifeless.  
    It will be a couple weeks until I receive them,and I was curious if anyone out in Agon land has tried these,and what are your impressions?   
Thanks in advance,

    Ray

128x128rocray

From pictures on the web it looks like you have enough room between tubes on the vac 200 IQ amplifier.

I use a pair in my tubed CD player and they sound great. They replaced a pair of NOS Brimar CV-181 that cost over 3x as much.

I've been watching thread with interest. I wonder if those of you who've purchased these tubes can address a few questions. 

As far as I can tell, only Grant Fidelity is selling tubes in two ranges - the "top 10% ultra low noise" and the "factory QC passed, driver quality". Has anyone compared these two ranges?

This raises the question what are people getting when they purchase from the other sellers mentioned on this thread? My sense is there's no free lunch and the lower price tubes that are being sold might be equivalent to the Grant Fidelity's "factory QC passed" tubes. It sounds like everybody who's buying these tubes is liking/loving them pretty well. Maybe the "top 10% ultra low noise" is not a requirement for these tubes to sound good. What do you think?

Also, has anyone who has purchased these tubes tested them and compared your results to those small sheets/reports you receive with the tubes? I'm sure the results won't be the same, but you might at least be able to see how closely the two sections match.

Another piece of information that would be helpful would be to hear what kind of circuit you're putting them in - are they going into a preamp, like a Supratek? Or are they going into a power amp, like in a driver position for a 300B tube? I'm using 6SN7s in both applications and would like to hear from all of you.

Best regards,

Markus no longer really the Naimnut...

@markusthenaimnut, I think those are really interesting points that you bring up. Other than my ears, I’m without any testing equipment.  I had an issue with some flaking of some cathode material in one tube,and after tapping a few times,this issue has cleared itself up.  The Linlai’s are as quiet as any tube I’ve had in my Motherlode II. This is a really quiet pre. I can pick an unused input,turn the volume all the way up, and with my ear to the speakers,only the slightest of a hiss. And I mean slight. Move away a few inches and it is silent.  IMHO, I always believed that the test cards that come from the Chinese vendors were just a gimmick.  Now,on the other hand,companies like Grant or Viva, I believe do proper testing and provide those results.   I am really happy with the performance of my tubes, unfortunately I don’t have access to any tube testing equipment. Hopefully someone can chime in that has,or has access to equipment.