Esoteric Mods

I've talked with Doug at ram mods a few times to help me with witch esoteri. to mod. he is very knowledgable on esoteric mods. I've purchased a new DV50, that I'll be sending him for a full mod. Kenny

Has anyone had a Mod done by RAM, if so which option did you choose the Silver or Copper transformer output wiring. If either were chosen how did it work out for you. Please advise. Thanks

I just recently purchased and had the opportunity to pickup a RAM modded ($2709) Esoteric DV 60 from Kyle/RAM, with the new Ultraclock upgrade (which is an additional charge). While I didn't have a chance to compare it to a stock DV 60. There was an unmodded Esoteric X-01 on hand and all I can say is that after spending about an hour playing the same song repeatedly on the DV 60. When the X-01 was compared to it, I wanted to run out of the room! The X-01 was cold sounding and lifeless compared to the modded DV 60. It was a complete beat down in everyway from top to bottom (and believe me, I'm not a placebo effect type person). I would also like to add that Kyle is a really cool guy to deal with and doesn't exhibit any of the eccentric egotistical nut job behavior that's out there.

I have a RAM-modded DV50, with the $2200 upgrade. It is phenomenally good. On CD, it's only slightly below my $25,000 front end, and only in such areas as fine detail retrieval and maximum nuance. Otherwise, given the same cabling, it sounds almost identical and just as musical. The same capability is there on CD, SACD, and DVD-A. Doug Jesse did my mods but the mods are probably equally good from both locations.

Mmitch, I've not used the RAM/Audio Consulting copper transformers, but I used both the "standard" OPT48 Silver and the Silver Rocks. The Silver Rocks sound quite a bit more refined but are not the most cost-effective mod you can throw into a high-end player.