Just so I understand this correctly: you are attaching a 1.5V battery (or more) across the speakers' connectors -- is that correct? You are effectively sending a DC signal to the speakers?
cheapest cable upgrade ever
I have recently been playing with a very cheap upgrade of signal carrying cables: Attach one or two 1.5V AAA batteries with the ‘-‘ pole in the direction of the signal’s source. Simple strapping on with electrical tape) suffices, no need to connect anything. The benefits are very audible. The weak electric field conditions the outer layer of the conductor to improve electron flow, resulting in a strong increase in transparency and dimensionality. This works particularly well on the digital cable going into the router and streamer as well as the speaker cables (on the latter ‘+’ alligns with plus and ‘-‘ with minus, i.e. two batteries per single post speaker.
At a minimum it is a low cost bit of fun
- ...
- 101 posts total
Amir attempted to test an AudioQuest Victoria Audio Cable with DBS Review and commented "How energizing an insulator traps RF works is based on principles above any known physics so don't know how to test that without alien technology. But we will test to see if noise is reduced in audio spectrum which is what we hear." |
@mrskeptic Could be trolling...you will only know if you give it a try. Many don’t but some are shocking successes. |
- 101 posts total