Musetec (LKS) MH-DA005 DAC


Some history: I was the OP on a four year old thread about the Chinese LKS MH-DA004 DAC. It achieved an underground buzz. The open architecture of its predecessor MH-DA003 made it the object of a lot of user mods, usually to its analog section, rolling op amps or replacing with discrete. The MH-DA004 with its new ESS chips and JFET analog section was called better then the modified older units. It has two ES9038pro DAC chips deliberately run warm, massive power supply, powered Amanero USB board, JFET section, 3 Crystek femtosecond clocks, Mundorf caps, Cardas connectors, etc., for about $1500. For this vinyl guy any reservation about ESS chips was resolved by the LKS implimentaion, but their revelation of detail was preserved, something that a listener to classic music especially appreciated. I made a list of DACs (many far more expensive) it was compared favorably to in forums. Modifications continued, now to clocks and caps. Components built to a price can be improved by costlier parts and the modifiers wrote glowingly of the SQ they achieved.

Meanwhile, during the 4 years after release of the MH-DA004, LKS (now Musetec) worked on the new MH-DA005 design, also with a pair of ES9038pro chips. This time he used more of the best components available. One torroidal transformer has silver plated copper. Also banks of super capacitors that act like batteries, solid silver hookup wire, 4 femtoclocks each costing multiples of the Crysteks, a revised Amanero board, more of the best European caps and a new partitioned case. I can't say cost NO object, but costs well beyond. A higher price, of course. Details at http://www.mu-sound.com/DA005-detail.html

The question, surely, is: How does it sound? I'm only going to answer indirectly for the moment. I thought that the MH-DA004 was to be my last DAC, or at least for a very long time. I was persuaded to part with my $$ by research, and by satisfaction with the MH-DA004. Frankly, I have been overwhelmed by the improvement; just didn't think it was possible. Fluidity, clarity, bass extension. A post to another board summed it up better than I can after listening to piano trios: "I have probably attended hundreds of classical concerts (both orchestral and chamber) in my life. I know what live sounds like in a good and bad seat and in a good and mediocre hall. All I can say is HOLY CRAP, this sounds like the real thing from a good seat in a good hall. Not an approximation of reality, but reality."

melm

@balja 

Has anyone tried to connect a Schaffner filter (FN9260-1-06) to the power cable for 005? In my system, a big improvement in the image of the stage and I finally hear what the real recording sounds like. It is not expensive and the production of a short reduction is simple. Someone try it to confirm it. By the way, I also replaced the original power cord with a silver "Supra"

I have noticed that both the Bricasti and Weiss DACs use such a device. While I try to stay away from any sort of "purifiers", I recently moved my rig around and I couldn't get my power cable into the 005 because a part of my rack was blocking it.

So I after looking around I tried this which is , I believe, essentially the same as you suggested with the advantage of being able to swap it around. It also comes in three different sizes. I bought the Furutech Flow-15 Plus.

I've found it significantly lowers the noise floor on the 005.

https://www.furutech.com/products/power-distributors-filters/in-line-power-filter-bulk-cables/

@lordmelton I have Furutech Flux 50 NCF which I use with my 845SET amp, never thought to use with 005. Have a feeling this would only make sound more analytical. Never had a thought 005 needed a lowered noise floor, incredible level of resolution I'm still mining points to pursuing lower noise floor with rest of system pays back with greatest dividend. The one thing I DON'T want to do with 005 is alter it's voicing in ANY way.

 

Still, it may be informative to try the Flux 50, I have tried a number of power cords, none have changed the voicing to significant degree.

+1 for the Furutech power "filters". Great product, been using my Flux 50 with the power amp. Will give it a try on the 005 next time I shut the amp down. 

@sns The Flux 50 NCF I believe is for a full system or power amps but there would be nothing lost to try it with the 005.

I haven't noticed anything regarding "voicing" altered in any way with the exception that lowering the noise floor is letting more natural detail through by getting out of the way of the noise, so it hasn't created analytical detail in any way.

I'd be very interested to know your results because the Flux 50 is quite expensive.

 

Filters for higher current do not have damping properties like filters with lower current load. I can't comment on other types than the FN9260. Great benefit... and I have not experienced any loss. My filter will be built right into the 005 when the warranty runs out.