New VPI purchase

Setup should be straight forward. 

Cartridge setup using the supplied jig won't  get the cart aligned for OCD types, but should will get you close enough to enjoy it. Anti skate topic is a no win, try it both ways to hear any difference.

Save yourself some frustration and get this. 

https://sound-smith.com/accessories/counter-intuitive-vpi-tone-arms

Look at Wally Tools

My advice is to first tell us, as someone else already asked, if you have the gimbaled or unipivot arm.  

Second, do not count on getting it set up without an experienced friend or hired gun. 

Third, if unipivot, forget about twisting the nutrik connector wire for anti-skate. It causes more problems than it solves. 

Last, don't overthink it. Get a Riverstone VTF gauge and get ovehang and VTF right and make sure your table is level. After that, setting VTA and AS and twist/alignment are all niceties that will improve sound but the myth that suddenly if you get seven parameters just right including loading the angels will descend from heaven and the musicians will be in the room with you is just that-myth. 

I've had the og Prime with the 2M Black for several years. You will love that table. Pay attention not to set the motor too far from the plinth.  This will strain the belt. Also if you hear clicking when the platter starts don't panic. Some talc on the belt can be useful but not entirely necessary. The VPI video is helpful. Next step is to invest in the outer ring. 

Happy listening.