REL Subwoofer - How to use the "Mode Selector" switch


Hi~ I hope someone can help me on how to use the "Mode Selector" switch on REL Britannia sub (mine is B2). There are four modes (1 to 4) and I was wondering which one to use if I want to reverse the phase polarity (=180) with the high level connection that REL recommends. The four modes are:

1: Line / 0 degree

2: LFE / 0 degree

3: Line / 180 degree

4: LFE / 180 degree

 

Many thanks!

johnson0134

as @noromance said ... #3

you should really read the manual, carefully, of your rel - more important to do this to set up and use these subs correctly than just about any other piece of gear

(if you don't have it it can be downloaded from their website)

 

I own a REL Britiania B2 Sub, The Mode selector switch changes the Phase from 0 to 180. If your using the REL SPKON (high level) connection (which you should be) Then you would only have to concern your self with the LINE (high level) setting ...you either use #1 for 0 phase or #3 for 180. ( when setting phase the louder one is the correct one).

P.S. even though this sub has not been produced in quite some time, it still is one of the best subs REL ever made, however over time the woofer will degrade and if you call REL in Berkley CA Im sure they would sell you the upgraded woofer for the B2...I think I paid around $350 for the new replacement...well worth it:-)

Matt M