2 REL Strata Subs and Mono amps


Hi all. Need a quick bit of advice.
Running 2 REL Strata IIi subs, each connected to its' own mono bloc amp.
Runnung Merlin TSM's.
What is the correct way to wire the REL high level cable with neutric connector?

The REL cable has a red, yellow and black wire.
Do BOTH the red and yellow wires get connected to the RED speaker output on the amp, with the black wired to the Black connectors on the amp?

Thanks
jdolgin
Brownsfan,

Could you publish your advice overhere, anyway? I face a very similar dilema with a pair of REL Gibraltar G1.

Thanx.
My advice is to contact the manufacturer of your amplifier to ensure that it is compatible with the intended use.
Zormi
I have a pair of REL G 1s connected in the manner suggested by the OP ie red and yellow to the red terminal and the black to the black terminal. This is what the manual says. Alternately, the yellow ground lead can be connected to a exposed screw(metallic face showing) on the amp on the rear etc
I have 5 REL subs connected in this way
Cheers