2 REL Strata Subs and Mono amps

Be careful. I sent you a message with more detail.

Brownsfan,

Could you publish your advice overhere, anyway? I face a very similar dilema with a pair of REL Gibraltar G1.

Thanx.

My advice is to contact the manufacturer of your amplifier to ensure that it is compatible with the intended use.

Zormi
I have a pair of REL G 1s connected in the manner suggested by the OP ie red and yellow to the red terminal and the black to the black terminal. This is what the manual says. Alternately, the yellow ground lead can be connected to a exposed screw(metallic face showing) on the amp on the rear etc
I have 5 REL subs connected in this way
Cheers

Sunnyboy1956, thanx a lot.

May we know what an amp(s) do you use? I am familiar with certain rumours that, reportedly, some fully differential balanced amplifiers could have serious problems with above-mentioned setting of configuration (ie. red plus yellow wires from the woofer connected to the red output terminal of the amp, while woofer's black wire to the amp's black output terminal).

Personally, I have a piece of Primare A32 250Wpc stereo amplifier planned for that task. The main part of my system is consisted of Krell Phantom preamp (with active crossover onboard) and a pair of Krell Evo-400e monoblocks. This combo is supposed to drive the main speakers, while Primere A32 is planned to feed two REL Gibraltar G1, via high level inputs, as REL strongly recommends in user manual.

Is good idea to ask Primare factory, perhaps? They should know well whether REL's high level input connection method is environment safe enough for power amplifier design employed in their A32..

Thanx once more guys, tips like these may apear as a true paramount for me.