2. digital
  3. 179354-163900

Settings for Oppo bdp105 used with external DAC (Tambaqui)

I just bought a Tambaqui primarily for streaming and stored file playback using the USB input but thought I’d hook up the Coax digital out from the Oppo BDP105 for playing CDs. I understand that the Oppo will not output anything on the optical and spdif outs when playing SACDs (only HDMI) but I can’t seem to get any signal on the spdif when playing regular CDs. I messed with the audio settings some but haven’t found a combination that works. Any recommendations on how to make this combo work?

Thanks

delkat
mahler123
3,313 posts
 

Can you clarify what you presently have the Audio settings of the Oppo placed at?  And have you outputted from the Oppo into other DACs?

chayro
2,984 posts
 

Are you sure your dac is set to accept the input and that your cable is working? Recheck pages 64-68 of the Oppo manual again. 

delkat OP
9 posts
 

I have a brand new Audioquest Carbon digital coax cable. I don’t currently have nor have I used another external DAC with the Oppo. I have a Node hooked up to the Tambaqui via Optical and it works fine. I’ve programmed the Tambaqui input 3 for the spdif and selected that input. 
 

Oppo Settings:

Playback - I’ve toggled between Multi-channel, Stereo and CD Mode for SACD priority 

Audio Format Setup - Secondary Audio = off, HDMI Audio=LPCM, Coaxial/Optical Output= Bitstream ( I’ve toggled between 48k,96k, 192k LPCM and Bitstream for this). SACD Output = Auto ( toggled between PCM and DSD for this)

More to discover