Aurender N200

It sounds great , just getting used to the different layout compared to Bluesound.  

It will not achieve digital lock with my Lab 12 via coax on anything 88.kHz or above.   Noise and dropouts,   Works flawlessly via USB , not sure why.   Seems to work fine with RME adi2 via coax so I'm not sure what's going on there, need to troubleshoot further.  

@oddiofyl 

 Congratulations  on receiving the Aurender. I hope that you get the connection issue sorted out. At this early stage, are there sound quality differences between it and the Blue Node?

Charles

It definitely sounds better , frustrating that it won't work via Coax out.  That is how I wanted to use it with this DAC.    Works fine with Vault with same cable , works fine with RME .  Tried new cable, known good cable.     Only loses lock above 48k with Aurender. 

@oddiofyl What coax cable are you using?

Also, are you switching sample formats often? If so there is a setting to allow to adjust for that and put a few second delay. Doing that sometimes helps to adjust for the switching. 

Hi Juan

I tried setting the delay and no change.   There is digital noise and the unlock light glows dim and the sample freq lights flicker.   Only works via lower sample rates.   Three known good coax , including new d-750.  

Tried the Vault in both coax inputs of DAC works flawlessly 

Works fine via RME coax input.   

Problem only exists with N200 via coax to the Lab 12 DAC