Low buzzing through speaks

No separating the cables made no audible difference whatsoever. This buzz has been steady and has not wavered from the first second it reared it’s evil presence😂!

I actually contacted Hosa the company and spoke with a gentleman in their tech support and ran this by him. He didn’t think their ground lift XLR would help as they are designed for microphones, but he admitted he did not know very much about home audio/HT. But I went and ordered one anyway☺️, cuz like you said it’s easy enough to return (like I just did with the Hum-X), and why not at this point?!

The Transparent cables are all 1.5m each…Guess I could also order an el cheapo XLR too, because again why not?!

@dpop  what if I tried disconnecting the XLR’s and try RCA (I do have some of those Transparent as well actually though lower end of their line). Why not right?

I keep my Kismet amp on 24-7, my Hegel preamp as well. When I’m not going to be listening to music during most of the week. (I mostly listen Thursday through Sunday) I detach one of the XLRs. no buzz.

IMO, if you’re spending thousands of dollars on components and interconnects, you shouldn’t have to tolerate any type of noise or buzz. Isn’t that why you’re spending those big bucks in the first place? I’m sure kingbr could do the same (as what you’re doing), but I support his not wanting to, and I’m doing my best to try and help him out.

For over 3 decades I was a Chief Engineer for numerous radio stations. I learned the hard way how to eliminate hums and buzzes, of all kinds. Try connecting hundreds of pieces of broadcast equipment together (both balanced and unbalanced analog) in 14 studios (in one building), and see how many buzzes and hums you encounter (spoiler alert; there will be a lot). And if I do say so myself, there was rarely ever a buzz or hum I couldn't get rid of. 

If it were me, there’s no way I would tolerate a buzz, when spending thousands on home audio equipment. From looking at the manuals on line for the Sim and Mac that are involved here, the XLR outputs are of low impedance, and the balanced XLR inputs are of high impedance - exactly the way it should be, but that’s a very simple way of looking at this, as there’s so much more that goes into a decently designed piece of audio equipment. I’m having a hard time understanding why these two pieces of equipment can’t be happy (with no buzzing) playing nicely together (such technical talk).

what if I tried disconnecting the XLR’s and try RCA (I do have some of those Transparent as well actually though lower end of their line). Why not right?

GREAT idea!

Guess I could also order an el cheapo XLR too, because again why not?!

I would recommend it if you don’t mind.

I actually contacted Hosa the company and spoke with a gentleman in their tech support and ran this by him. He didn’t think their ground lift XLR would help as they are designed for microphones, but he admitted he did not know very much about home audio/HT.

It really depends on who you talk to. Some guys know where I'm going with this, and some don't.

I think the common denominator here is Revel speakers.

I think the common denominator here is Revel speakers.

That may be, but kingbr already stated that there’s no buzz when disconnecting the XLR cables, with the amp on. I’m assuming the amp is not being trigger ON by audio. I hope that’s not the case. That would be absurd (and thankfully I don’t see that mode of operation option mentioned in the Sim manual).