THE IMPORTANCE OF TIME DOMAIN RESPONSE MUST READ


Speaker designers ignore or downplay the importance of TIME. Why?

A high end speaker should be as accurate as possible and that means it should not only be optimized with regard to frequency response but time response.

Back in the 70’s and around that time, speaker engineers thought that a perfect speaker would be one that had a flat response. This idea has waxed and waned in popularity over the years and even now there is no consensus.

What the speaker engineers forgot to consider is Time response.

The time reponse of a speaker is how fast it starts and stops. A perfect speaker would have a perfect time response of 0. Since this is not possible, we must get as close to it as possible. The problem is speakers engineers have neglected this aspect of the design and so speakers over the last 40 years have not improved in this respect.

Time is such an important aspect of the sound we hear. We not only hear tone but also time. The brain can detect time differences of only a few microseconds. Experiments have shown that the start of each note is what we use to determine what instrument is producing that sound.

We must ensure that our crossovers do not smear the time response because it will be heard by our ears. Time inaccuracy is why high end speakers do not sound like real instruments.

Diffraction from the cabinet can also cause time smear. We need spherical cabinets not square boxes. Tweeters need to be time aligned in order to ensure that when the woofer stops so does the tweeter. When the woofer starts, so must the tweeter. The woofer itself has to have a Qts of ZERO to prevent time smear. Ports must not be used or else you will get ringing.

We need to make it mandatory for speaker companies to publish the time response of all their speakers so that consumers can easily compare and decide exactly what they want. Some may actually prefer a speaker that has a poorer time response and that is fine. The problem is, we cant decide unless we know what we are buying can we?

Unfortunately, 90% of speakers on the market, even high end speakers have ports. And they are also made of cheap wood, even though there must be better materials by now. Some materials ring more than others.

So dont be deceived folks. If you want better speakers, you will probably have to make them yourself because speaker manufacturers dont care about sound quality. They spend millions of dollars on anechoic chambers all so that they can get a flat response but they spend zero effort on better time domain response. We are being duped.

kenjit

Peter Walker invented the first time-coherent speaker back in 1955! It is the Quad 57 - named for Peter's company and the year the first commercial ones appeared. Still a landmark product!

Apparently, the engineers who design speakers don't know what they are doing?  They must be beating a path to kenjit's door to have it all explained to them?  I for one don't need to understand all the minutiae it order to know if I like the way it sounds.  Why am I still investing time typing this? 🤣

The QTS for a troll must be yuuuge! Lots of reverberations in my head after reading this. Should have know better. Lesson learned.

Based in absolutely nothing:

Speaker designers ignore or downplay the importance of TIME. Why?

Kenjit, whi has never designed a speaker, would like all of the professional designers to know how wrong they are.  Again.

 

😂

@timlub 

You know Kenji,  you are one person that I wish that i would have never responded to when contacted

Likewise. You misled me into thinking a design would be forthcoming, even giving me a deadline yet you then pulled out at the last minute after hours of discussion. Perhaps you realized that meeting the requirements of such a perfect audiophile like me was far more difficult than you first thought. 

 

@bigtwin 

Apparently, the engineers who design speakers don't know what they are doing?

Of course they dont know what theyre doing. A speaker is supposed to reproduce the signal you give it. Yet all high end speakers sound and even measure differently. They cant all be right can they

@erik_squires 

Kenjit, whi has never designed a speaker, would like all of the professional designers to know how wrong they are.  Again.

Its not just about getting them to know how wrong they are. Its about getting them to design speakers correctly. Audiophiles spend millions of dollars on high end speakers. It is a multi million dollar industry. We deserve better quality. So I deserve my speakers to be accurate not only in tone but also in time. Until that happens we are stuck and the only solution is to make and tune our own speakers. Which is what you obviously realized when you did the SNR1. Do not buy fritz though. They are not very good.