Which power cords have high resolutions and separation??

MC! What’s happening baby! Good to see you here!

@antigrunge2,

Even though that article you posted is a few years old, after reading it was when I got the idea along with comments from millercarbon and others to start a build of a Synergistic Research full loom. Very informative article.

Although I am curious to hear about a power cord from Infigo Audio when they are released to the public.

@lak if you like S022N & S032N, try (and be patient) with TCS31 (12awg),

smooth with excellent detail, speed and extension.

Most likely their second best (sonically) bulk pc behind DPS 4.1 (11awg).

Here comes the wire quality as @cleeds pointed out.

PURIST or TARA LABS jump on one ASAP!!

First, start with a dedicated 20Amp circuit with a whole house surge protector ($ varies) wired with 12 or 20 gauge wire and a Hospital Grade receptacles ($12 ea). Next get a good cheap oscilloscope off eBay or C-List and see if you've got any RF riding the 120V at the outlet, and if you are really properly grounded. If that's clear, any 10-12 Gauge power cable will work. But none of them can fix dirty incoming power. Everything else is voodoo physics and confirmation bias. 'Removing a veil' is usually reducing noise. "improved dynamics requires dV out > dV in (change in output greater than change in input. A physical impossibility unless you have an actual expander circuit in play (remember DBX?)

Thanks tyray, glad you are doing well with SR. Hard to go wrong there. Especially in the price range nasaman is talking.  At some point you get to where you can afford M101 and then that’s the way to go. I’ve compared a lot over the years, it is hard to imagine how anyone who has bothered to listen still hasn’t figured out how much performance is left on the table by neglecting this essential component. I have yet to demo any and have anyone disagree. 
 

Got one flying in from TX middle of December, maybe demo PC along with Cradles and Hot Stampers. And ribs, and craft ales. Just how I roll, ya know?