New MOFI speaker (Andrew Jones)

I would think Sound Anchor stands would have a model that would work with these speakers. Does anyone know the suggested height of the stand?

@grislybutter  Look at the SKY-KH4 stands on the following page:

https://skylanstands.com/index.html#stands2p

Why not just get these stands from Monoprice for $80 and fill them with sand, lead shot, etc. and use a little Bluetack to keep them anchored and further minimize vibration?  Or spend $700 on Skylan Stands.  To each his own I guess. 
https://www.monoprice.com/product?p_id=42833

I totally agree with the Monoprice stand recommendation.  I have pairs in 24", 28" and 32".

I was a dealer for Target Audio, Arcici, Sound Anchors and several others.

IMHO, these, with a little bit of inexpensive tweaks and upgrades, are just as good as any of those...and MUCH cheaper.

I sure recommend them...for what it's worth.

A look at the Sourcepoint 10 manual states the tweeter should be 33" off the floor.

• That's about 2" lower than how I now sit and I'm only 5' 6"
• With my JBL 4319 monitors, my ear is at the lower third of the midrange driver with the tweeter another 5 1/2" higher and I get a healthy dose of the high end that way.
• AJ's design should have decent vertical spread for the tweeter so it should sound good at +/- 5" (at ear level) when listened to at a distance of 8' of more. 
• Throwing in some Iso Pucks brings that down to +/- 4"
• Throwing a 2" butcher block brings that down to +/- 2"
• See where I'm going with this?
• That would make my Wharfedale Linton speaker stands more than acceptable at their 17" height and may have some base reinforcement from the lower positioning

Isn't it great how one can rationalize things in this hobby? 😄

All the best,
Nonoise