Implications of Esoteric G-0Rb atomic clock


The latest TAS (March 2008) has an excellent piece by Robert Harley: a review of the Esoteric G-0Rb Master Clock Generator, with sidebars on the history and significance of jitter. This Esoteric unit employs an atomic clock (using rubidium) to take timing precision to a new level, at least for consumer gear. It's a good read, I recommend it.

If I am reading all of this correctly, I reach the following conclusions:

(1) Jitter is more important sonically than we might have thought

(2) Better jitter reduction at the A-D side of things will yield significant benefits, which means we can look forward to another of round remasters (of analog tapes) once atomic clock solutions make it into mastering labs

(3) All of the Superclocks, claims of vanishingly low jitter, reclocking DACs -- all of this stuff that's out there now, while probably heading in the right direction, still falls fall short of what's possible and needed if we are to get the best out of digital and fully realize its promise.

(4) We can expect to see atomic clocks in our future DACs and CDPs. Really?

Am I drawing the right conclusions?
Ag insider logo xs@2xdrubin
C'mon Ehider, tell us who is doing it right today. Whose gear did you hear that convinced you of this rosy future?
Most of this conversation is over my head, but Ehider are you talking about the Asynchronous Mode USB Audio in Gordon Rankin's new DAC's?
I wish I could talk more about what I recently heard (I've been sworn to secrecy). As to my earlier posts, I was not talking about a USB DAC that is currently available to the audiophile public at this very moment. Based on my discussion with the designers, it should be released within the next six months or so. In terms of the question regarding Gordan Rankin's product, this may be part of the "new wave" of revolutionary USB connected products that sonically prevail over typical transports/DACs. Unfortunately, I have yet to hear Gordan's product myself to determine if it also reaches above the levels which we are accustomed from typical "statement" digital offerings. As far as the "Beta" pre-production USB DAC that I heard though (from a company other than Gordan Rankin's) it was a serious jaw dropping experience!
So, now we are finally approaching the pure "bits-are-bits" theory with the USB based digital music reproduction (as was intended from the beginning) and we're leaving the vagueness of the bits-are-bits + something magical concept. This could be a manifesto. To all audiophiles worldwide: Get rid of those mediocre CD transports!

Chris
AFAIK any digital signal that requires conversion to analog (which is the format of the sound that we hear) requires a clock. So even USB based DACs will require a clock for the data (asynchronous or otherwise) to be converted to analog. Though not exactly the same, it's like tuning into your FM radio station.. If you're not tuned into the right frequency, you won't get the full sound. If your recording runs at 44.1khz, you need a clock that runs at 44.1khz.. Can't get away from that clock.

Bottom line: bits can be bits until the point where it's converted to analog, at which point you would need the most accurately constant (i.e. lowest jitter) clock possible to ensure the sound's integrity with the lowest jitter. One solution?...the atomic clock.