Want to add vinyl to my system.


Hello all, 

I have an all digital system with a Lumin x1 streamer, Oppo 203, B&W speakers, Classe Sigma SSP, and Mac 611’s.  I want to now add vinyl into my system abd need a new turntable and phono stage.  I have been considering the Rega 8 or 10.  What do you think of the Rega’s, and which phono stage would you recommend?

bwguy

Thank you for all the responses, you all have given me things to consider.  As many of you have asked, is it wiser to spend my money to continue improving my digital system, or venture into vinyl. I guess I want the best of both worlds. I have several hundred albums from the 70-80’s, but I would also want to start purchasing many of the classic remastered vinyl albums out there. So do I simply dip my toe and start with a more modest vinyl set up? I have a feeling if I do that, I will find a modest vinyl up will be inferior to my digital system, and will lose interest. If however, I go in with higher end vinyl equipment, I may even get more enthused. I have to think both style of systems always need improvements (better cables etc).

I was just about to pull the trigger for a Rega P6 with an Ortofon 2MM Black a few years ago but then opted for a MoFi Ultradeck+M at the last minute, instead.  Don't regret it for a second!  Many of the reviewers I read prior to making this move said it was the best you could get for under 5K at the time. Actually they said you could get diffferent sound from several TT in its price point, at the time, but not better, just different. I haven't heard as many TT as they have, of course, but I think they are right. That Mastertracker rivals a lot of moving coil carts. Unfortunately, the Mofi has gone up in price since its introduction, probably because of all of the awards & recommendations it's gotten. Rega is a proponent of low mass design. If you go with a Rega, make extra certain you have something absolutely rock steady to put it on. Actually, that's good advice for any TT. Also, consider all the other stuff you'll need to "do it right", so to speak (e.g.  good record brush or air blower type thing, if you're into that; stylus cleaner; record cleaner; etc.). Yes, vinyl does require more dedication & work than digital but the pay-off, if you're willing to devote yourself to it, is in the fidelity. Enjoy!

I’m in a similar situation, with roughly 400 late 70’s thru early 90’s vinyl and a Grado gold MM on a decent turntable / tonearm set-up but as much as I want to love it, I switch to Tidal and stream the same music and it’s just better…much better. 
I consider going down the rabbit hole to upgrade my phono aspect of my system, but just don’t think the investment, which obviously would be several grand, is something I can justify….for what, to get it to sound “as good” as my digital setup?

unless I think it’d be better…..not sure I’m down with that. 

I’ve had the Rega 2.3 and 6. I like the $2500 MoFi better.

I like the Mofi because I am a "clear" guy. I like clear and concise sound without the rounded off highs and lows Rega stuff tends to hand out. That sound is not to everyones liking however.

That being said and perhaps going after a "blend" of clarity and heft, In truth, the Rega 3 is a superb table for the money and with the correct cartridge, it can come to life. I like the Benz Micro stuff from the Silver on up.

The Rega 3 of today is equivalent to the Rega 6 of yesteryear in my opinion.

If I can be contrary to what some here have stated, I do not find it a "labor" to play vinyl and do not agree with those saying you have to spend uber amounts of money to get equivalent or a sound pleasing to you.

What I have found that many of those who complain of vinyl playback being inferior, have always have had a poor cartridge match to their TT’s. The Benz stuff is superlative carts for not crazy money either. I have never liked any of the Rega carts even on their own tables.

Heck, my old Rega 2 was better than a lot of $3000-$5000 cd players with a Benz cart..

All of this is thru ProAc monitors which are neutral in presentation.

I don't recommend anything from Pro-Ject's upper end. The build quality is simply not good enough for the money. 

Clearaudio makes some really nice 'tables which is what I ended up with.

I've got about $14K in my analogue front end including cables and isolation platform. I didn't by anything used. Full details in my virtual system. The Aidas cart is phenomenal. 

My local dealer who I trust implicitly is also a REGA dealer and he steered me towards the Clearaudio Performance DC over the P10.