Lyra Atlas experiences

A system I am extremely familiar has been demonstrated to me within the past week with a New Floor Standing Cabinet Speaker in use, or not in use🤔, the only way the Speaker could be identified with was from Sound and Visual, the Speaker Cabinet impact on a SQ, is something I am sensitive to. These Speakers Cabinets have no effect to what my ears perceived.

The Vinyl Chain due to these speakers is one I am unfamiliar with, and I still scratching my head about the demonstration, it has made such a good impression.

It certainly has reinforced a view I have carried for a long time, being every thing up stream of the Speaker is processing a electric signal, it is from the exit of the  Speaker Xover that the Sound is produced, and it is the Sound that we listeners Judge and Assess by.

Looks like the different Sub's fit into this theory/fact. 

@dwette , You are correct. I forgot about Clearaudio's magnetic bearing. However, even though you are happy with what you have, record weights and peripheral clamps do not do an adequate job of flattening a wayward record. The other problem with peripheral clamps is that they are large, heavy and in very close proximity to a tiny, very fragile, expensive and very open cantilever. You will not be the first person to knock their cantilever off with a peripheral clamp. The Michell Clamp is relatively inexpensive, try it. If you don't like it I'll buy it from you for whatever you paid. You can use the peripheral clamp for a frisbee :-)

@mijostyn Thanks for the suggestions, but I’ll pass on trying a different clamp. I’ve used what I have for years and it suites me well enough. It doesn’t have to be 100% effective or the best solution. 

Just a small update. My Atlas 2018 is still working well. No problems. I know I should wash my LPs but dry cleaning with the Mobile fidelity brush works ok for most of them, not much clicks or mistracking. Maybe it sounds a bit better with a bit of fluid in the SME V damping chamber - not  sure, testing. Platter mats - no. Extra damping on the  arm - no. Fozgometer azimuth adjustment, yes. 

Dwette, you actually think you hear a difference between 453 and 470 ohms loading? I am either impressed with your auditory acuity or dubious. Or wondering about your phono stage.