Speakers for Atma Sphere M60 mk3

I currently use my M60s with Quad ESL 57 and 63 speakers. Previous to that I used AudioKinesis Jazz Modules. In fact someone is selling a pair on AC right now. It's a great match with the M60s, 92 dB, and impedance stays above 8 ohms. As for driving a 4 ohm speaker you can use a set of the Speltz autoformers between the speaker and the amp. Depending on how you configure them the amp will see a 2x, 3x, or 4x the speakers impedance.

I tried the MA1s (bigger brother of M60) with 4 ohm speakers, including the top of the line (at the time) Dynaudio Consequence. No good.

8 ohm - yes quite good. Varying.

Spelz autoformers - I tried and was not convinced. Veils the image a bit and contradicts the OTL idea.

My current speakers have Impedance: 16 ohms nominal, stays between 13 and 17 ohms above the bass impedance peaks, and Efficiency: 92 dB/1 watt.

This is clearly health food for my Atma amps. Their sonic performance rises to new heights. But results could be suprising. If you can try with the Elipsas, great.

As I understand is the 4 ohm Elipsas not a good match....

Keep the Elipsas and go with AR or sell them and get the 60s and 8+ ohm speakers....

Speaker suggestions for the M60 are welcome!

Thanks!

Check Audiokinesis speakers, very OTL-friendly.

 Devore's play well with Atma-sphere. The Gibbon series are 8ohm with a pretty benign load.