New Synergistic Master Fuse


New From VH Audio,

Synergistic Master Fuse cost $595.00

I'll stick with Orange Fuses.

128x128cincyjim

I suspect that all similarly rated fuses sound the same, but when you replace them, the contacts are remade and that's why they sound better.

But - and it's a big but - a lower impedance fuse will sound better than a higher impedance fuse, and impedance is correlated with the current (ampere) rating.

I use Hi Fi Tuning fuses {white} at £35 each. And they do make a difference. more mid and high. If you have not tried the upgraded fuses, why comment ?

I might try one of the new Master Fuses, but I’m quite happy with the Purples currently in my system. I know that there are several companies offering fuses for a lot more than $600, but that’s about hitting my limit, at least for the equipment I’m using.

 

My friend out west owns was a beta tester , just like the purple fuse is their best effort , BTW je Audio magic M1 fuse I have as well as others in your audio get together , and head to head  80% preferred the AM -M1 fuse .

it has betterBass, dynamics and organic  depth of instruments .ut it is $300 vs $200

imo a good compromise.  getting back to the New Synergistic $600 fuse The beta tester said yes it is better but a bit deceiving  the depth as well as soundstage Huge 

in some audio systems depending too on your tweeter  May wan5 a more grounded image depth ,sure the airiness can be nice ,but on R&Roll you  may want 

Thst grounded focus , he stated try the Audio  M1 if that don5 flout your boat then think about the $600 plunge.

Mastering92  could-not be more wrong . Having owned a audio store I had the same gear  with stock buzz fuses ,and then top Hifi tuning ,Synergistic , fuses 

a improvement on every piece of gear , not knowing which dac, preamp,or amplifier 

just look up metals resistance index , All power comes in through the IEC and That  Fuse , a steel zinc buzz fuse has a conductivity rating around 19

a top Hifi tuning silver gold fuse a rating around 65 that’s 3x+ the conductivity 

the stock fuse is a Huge bottleneck which = 3 x more resistance which = noise ,you can ignore the truth , but these are facts just look it up . When you put any non stock fuse inside says an amplifier like my Parasound Halo amp it has 4 rails fuses 

that is another level of detail and refinement and Clarity ,the hash sounding stock fuses present when compared directly too , this too depends on the refinement of Your Audio system, if it’s of say $6k including Speakers then. You may not have the Audio system that would pickup all the added low level details , but it will still be cleaner sounding ,For Sure .   The same goes for power cords ,wire is not just wire 

some people use Blue Jeans cables good enough and that’s fine for a moderate audio system but sonically there is much better  for many reasons ,if not so there would-not be such a Huge difference in models even within the same company. The point Is spend time  listening for a month  and comparing like we do at Our Audio get together to prove or disprove a theory , not everything is a night and day difference . Never Assume ,or go by 1 review look for many opinions ,and look for money back auditions which then cost you very little . If you have not spent several weeks comparing say 200  hours at minimum then , you can’t give a honest opinion .Any long time Audiophile knows once you spend to a certain point , $$ money wise the amount of improvements are diminishing returns . Being a Audiophile for most of us it’s a never ending journey , for tweaks or upgrades !!