What's A Good Upgrade From A Manley Steelhead?

Dear @rooze : " but we invariably lose ’something’ and ..."

Trade-offs always exist in the audioworld and unfortunatelly for the tube lovers are accustomed to those high kind of distortions and these is what you lose changing to the SS alternative but is not a "sad/good " lose. In the same way that you will miss in the short time that " lose " in a short time you will start to " accustom " of the new kind of " distortions " ( if any ) with the 610LP.

Every one of us have their specific targets in our room/system, mine is to stay nearer to the recording and if with my SS phono stage I add and lost the less of what cartridge pick up from the LP grooves then I’m nearer to the recording because through tubes that add/lost is higher that what you could imagine.

My feeilng ( I can be wrong ) is that you are a MUSIC lover that know the live MUSIC kind of sounds. Now if you are waiting that the SS alternative gives you " more of the same " but " better " then don't take that " road " and stay as you are.

My take too is that @drbond ( I can be wrong ) think that you are just an audiophile and follower of the corrupted AHEE. I don't.

R.

Are you using it with an SUT?

Using what with a SUT?  The Steelhead has three pairs of phono inputs.  Two are for MC cartridges, and one is for MM.  You can choose up to 65db of phono gain.  So there would be no need for a SUT with most LOMC cartridges down to about 0.2mV output. (I actually used mine successfully with an AT ART7, which outputs only 0.12mV, but that is probably owing to the fact that the Beveridge amplifiers are "sensitive".)  Right now I am using it with Koetsu Urushi, and the attenuator is not even at its midpoint for very high SPLs in my large basement room.  But maybe you did not refer to the Steelhead.

Van Den Hul Grail - very quiet current mode, I have the SB model

Esoteric E-02 - compares well to top phono stages-  seems to be a sonic bargain 

@marantz8  Not presently. I ran an Audio Tekne MC 6310 (0.1mv) and used an Audio Tekne SUT for a while, but it actually worked better without the SUT.