Lumin X1 and Upgraded DC umbilical cord for power supply.


I know this question is so very specific but just wonderin’ if anyone has experimented with aftermarket umbilical cords to be used with their Lumin streamers.

I see that a company called Westminster Labs sell a cord for $$$. And Audio Sensibilities also sells a cord for much less and has my interest.

Has anyone had experience using one of these cords?

ozzy

 

128x128ozzy
Post removed 
Post removed 

The Audio Sensibility DC cable uses cryogenically treated Teflon insulated OCC silver. This is the same OCC silver used in premium audio cables such as the Wireworld Platinum Eclipse 8 line.

OCC silver is very expensive and is the primary material cost of our cables. The Japanese DC connectors are also not inexpensive

I can see where a plausible case on behalf of the higher quality materials could result in improved sound quality performance via the DC cable. @ozzy I am interested in your upcoming listening impressions.

Charles 

Here is post from a gent from the What’s Best forum on the subject.

"If I were to rank the umbilical cords on a scale of 0 to 10 with 0 being awful and 10 being perfect (and by definition, unattainable), I would put the stock umbilical cord at a 2 or 3, the Audio Sensibility umbilical at an 8 and the Westminster Lab umbilical at a 9 or 9.5.

The AS umbilical is a HUGE upgrade over the stock umbilical, and as a value proposition, it gives you the best bang for the buck. The WL umbilical is a smaller upgrade over the AS, but it provides, at least in a high-resolution system, noticeably more resolution, deeper bass, more extended highs as well as a greater control over attacks and decays.

It’s the law of diminishing returns -- you get more versus the AS umbilical, but the incremental cost per unit of improvement is much higher than the incremental cost per unit of improvement afforded by the AS umbilical over the stock umbilical."

I just received the cable today. Boy, what a PITA it is to connect the cable to the Lumin proper! What a design! Took a little swearing...

ozzy

Boy, what a PITA it is to connect the cable to the Lumin proper! What a design! Took a little swearing...

ozzy

Isn't it a plug-in connector with pins? What makes it a difficult task ? Just curious. Going from a rating of 3 to 8 is quite the improvement.

Charles