Hales transcendence 8 tweeters

Ejvic, don't worry about the crossover... mount the tweeter, get a good listen.... then we can worry about changes if your not happy. I suspect that it will be pretty good... and if the earlier post on the Seas tweeter was correct, we may need to completely remove a resistor or 2....

Ok..I saw a couple dale resister in series in the tweeter area if I am not mistaken..I'll wait for the tweeters and listen to them for a while..the one installed is not too bad except if the volume is a little louder then I start noticing the brightness of the sounds just like you said it is higher volume ...the t8 is a good sounding speakers ..sounds like live music kind if thing..they nothing compare to my sonus Faber Amatti homage but t8 is really sounds good.thanks

Give Bill Legall from Millersound a call to get his opinion on this situation;he is well known in the business and highly respected for his work.

Millersound
1422 Taylor Road
Lansdale, PA 19446-1531
(215) 412-7700

Ejvic,
I hope that you did indeed buy the F version (not A version) of the tweeter that I recommended.... I've been researching the Hales info extensively. I have a photo of the crossover and I'm sorry to say now, but I have found a replacement diaphragm for the tweeter....
Here is the diaphragm: http://www.madisoundspeakerstore.com/scanspeak-voice-coils/scanspeak-voice-coil-d3004/
The good news is that the Dayton RS-28F-4 is still a reasonable replacement, it should cross well and it will be down about 1.5 DB from the original tweeter, You may love it you may want to change a resistor... to correct. Or, Scan Speak now owns Vifa, this is supposed to be the correct diaphragm...
Don't say "now you tell me" took a lot of time to find this info. Tim

The

That's good you found some diaphragm but I don't have the original tweeter when I got them...I just got the Dayton and I will install them this weekend.thanks