Classé CP-45 remote

oddiodfyl: thanks for the info

fuzztone: the whole problem is the original remote not transmitting a signal

dinisore:  thanks for the info & I definitely love the Classé stuff!

I hate a machine beating me, so I'd rather break it than not try to beat it.

I have successfully restored many (not all) remotes by taking them apart, giving all the parts a bath with a brush and alcohol, blow dry with compressor (or canned air), let thoroughly dry, back together ... peanut butter removed, hair, dust, oxidation.

back of the flexible sheets with buttons, the face of the circuit board(s). I've never had or tried to use the conductive paint mentioned above, the backs of the buttons have always looked good, but it's nice to know about it.

sometimes it doesn't work, but no worse off than before. If I scratch it cracking it apart, it's better than giving up, or not trying. even if you break a tab or two, they usually hold themselves together well enough.

Steve at VAS was able to fix my Cayin amp's remote, some functions worked, others didn't, cleaning didn't help.

Many remotes have an A/B switch in case you have another remote of the same brand. Look for the switch (could be under the battery door) and try the other setting.

A long shot perhaps, but I couldn't find the model remote that my AVR uses, but a place called Dan's Electronics had a superceding model. Works perfectly and was reasonable. Found him on the Bay.

Logitech learning remote?