Which is the best CD-Player up to $ 10k ?


I´m looking for a very good cd-player in the price range up to 10k to be paired with my new Ayon Audio Sunfire single ended tube integrated.

On my short list are Wadia 581SE, Audio Research CD-7, Ayre C-5xe, Esoteric X-01 Ltd. and Audio Aero Prestige SE

Main music preference is classical music, opera, and electronic music.

Speakers are Ayon Audio with ceramic drivers.

Cabelling is all Shunyata Research (but is planned to be exchanged with either Virtual Dynamics or Stealth Audio)

Any input regarding these units is highly appreciated. Thanks fellows !
frankpiet
Dcs must have deep pockets if they can loan $20,000 cd players demo models to potential customers.

The upshot is you get to test it out but its much more expnesive so in essence if you buy it you are paying for the luxury of the home audition

On the other hand, the playback designs cost less than the emm labs, dcs so don't have budget for demo tester models.

I personally would insist upon a listen first except for jonathan at chambers audio since his taste is impeccable, word is golden, reasonable prices
John, I understand your point, and I don't disagree. The only thing I might add is that I do think it is possible to put together an audio system that is faithful to the sound of live music and that does not require any of the components to do any "smoothing" per se. The notion that an audio system needs to have something in the chain to achieve some masking or smoothing of the sound implies that there is something inherently unmusical, unnatural or flawed with the recording/mastering/pressing process or the software format itself.

I'm not sure that's the case. Personally, I try not to introduce any component into my main system that has the effect of masking or smoothing over anything. Components that mask or smooth things over tend to compromise resolution, clarity and transparency.

As for the AMR CDP and the EMM Labs gear, there seems to be a basic assumption underlying some of the posts here that the EMM Labs gear is inherently more resolving. However, I have not found this to be the case. I have found both the AMR CDP and the EMM Labs separates to be very highly revolving components, and I have not personally found that one has an edge over the other in this area.

I would agree with the general notion that the EMM Labs gear tends to sound more analytical, while the AMR CDP tends to sound more musical. However, I doubt anyone has any real basis to assert that either source is inherently more neutral or more accurate than the other. As some have pointed out, that's a difficult assertion to make since we all lack a reference "neutral" benchmark.

I am very interested in trying the Payback Designs CDP to hear for myself how it stacks up. The advances that have been made in digital playback in recent years are really very encouraging.
Interesting discussion about how to achieve the best sound. I feel that a high-quality source that is faithful to the recording is the place to start. I would give equal footing to the source and the speakers. I've invested more in proper set-up for the source than in any other component in 3 different systems.

What goes in between the source and the speakers should not smooth or mask, but help let the source realize its greatest potential. This means quality components, attention to power, cabling, connections, and isolation. Many high-quality components respond quite favorably to optimization and tweaking. The concept of a cable that removes information, without taking the proper pains to set-up correctly, seems to be going in the wrong direction.

As a generality, going from around the 5k to 10k price tag for digital results in a 3-fold improvement in performance.
08-05-08: Cincy_bob
John, I understand your point, and I don't disagree. The only thing I might add is that I do think it is possible to put together an audio system that is faithful to the sound of live music and that does not require any of the components to do any "smoothing" per se. The notion that an audio system needs to have something in the chain to achieve some masking or smoothing of the sound implies that there is something inherently unmusical, unnatural or flawed with the recording/mastering/pressing process or the software format itself.


You are correct Cincy_bob, however, IMHO the digital format IS basically flawed. FWIW, I see that you are using Jena Labs cables and darTZeel amplification, which are wonderful components, but many would consider "smoothing".

What one may consider "accurate" another may consider "bright" or "smoothing" depending on the ancillary equipment. For example, Jena Labs Valkyre were my reference cables until I purchased my reference speakers, Verity Audio Parsifal Encore's. At that point the Valkyre's sounded too warm and lifeless. The Verity's are notoriously warm speakers, so combining them with warm cables was a no-no. Silversmith cables added much more life and "accuracy".

The bottom line is that most of us use "smoothing" components/cables at some point in the chain, especially when digital is the primary source. When someone calls their single component/cable "accurate", it's usually because it mates well with their other "not so accurate" components/cables.

Cheers,
John
In my opinion the AMR does not lack resolution at all. I had the chance of auditioning it in my system. It is a very good player indeed. On the other hand it still sounded somewhat colored to my ears. I just dont get it why a source should have tubes...It doesn't make sense to me.

Regards,

Michael