Denafrips Terminator Plus vs T+A DAC 200

@bhvf - Did you compare the Rockna Wavedream to the T+A 200? I have been meaning to purchase the Rockna for a while, and am very familiar with T+A quality. Now all the positive reviews are intriguing to me - so I would definitely love to hear your thoughts.

@nitewulf Even though I've had both in my house, I had a different amp when I tried the Rockna.  My thoughts at the time of the Rockna were that it was slightly less warm than the Bricasti but warmer than quite a few other DACs. The Bricasti was similar to my Teac NT-505, which I really like. Comparing the T+A to the Teac, I hear more openness and resolution with the T+A, in a good way.  I like a warmer presentation normally. The T+A is not warm per se, but it's resolution appeals to me in a way that other, more detailed DACs, don't. I would buy the Bricasti all day over the Rockna but haven't compared the Bricasti directly to the T+A so it's tough to give a definitive answer. I'll be comparing them soon. If you haven't already, read through @verdantaudio's thread about DACs. It's very informative. 

@bhvf - thanks. I personally tend to enjoy the R2R designs, hence Rockna as an upgrade option. I also prefer a slightly warm presentation, and truth be told, we need to be honest about preferences as well.....if someone says they prefer dead neutral systems, yet listen to only warm recordings, what does that actually say?

I don't think anyone likes cold, analytical recordings, or sterile recordings, but unfortunately a lot of great albums were not recorded well. So if a dac or an amp helps sweeten that, I do prefer that.

I have to check out the T+A, I love the old school look of it, and very familiar with the HV integrated. Unfortunately I can't audition the Rockna.

@nitewulf I had an MHDT Balanced Pagoda, which is an R2R, for a while too. I really liked the sound of it but thought the build quality was a little weak. It also wouldn't work using my Lumin U1 Mini as a volume control while all other DACs did. I would give the Bricasti M3 a try if you could. Where are are you located? New Jersey has a dealer for many of the brands, including Rockna and Bricasti. If you're only looking used, be patient, buy well and you can probably break even.

For what it worth, I wrote this ealier regarding my A/B comparison with the Holo Audio Spring DAC 3 KTE....

My observations on the T+A DAC 200 and how it stacks up against the Holo Audio Spring DAC 3 KTE.

But first, the system used for the A/B test:

Pass Labs XP-30 Preamp

Pass Labs 260.8 mono block amplifiers

Lumin U1 Audio Transport (NOT the Mini version)

Wilson Audio Sasha 2 speakers

SHUNYATA RESEARCH Alpha Speaker Cable

Kimber Kable Select Series Balanced interconnects

Kimber Kable AES digital cable

Cardas Clear USB cable

(2) JL Audio e100 Subs

Power cables from Shunyata, Synergistic Research and Tara Labs.

All digital devices and preamp are plugged into a PS Audio PowerPlant 15 and amps are plugged directly into my Furutech wall outlets.

The system is dead quiet at idle, and I did all listening with the NOS 2 Setting, so no special effect filters involved.

As I write this I have about 50 hours on the new DAC. The Holo Audio DAC has been in my system for a year and is very well broken in and sounding wonderful.

Out of the box and into my system, I fired up some of the tracks I know best and commonly use for system set up. Everything from Zhu, Ray Joseph, Lady Blackbird, SBTRKT, London Grammar to Sohn.

All of these artists have a very clean and well recorded presentation, so I can easily decipher where the fault lies when listening.

The first and most obvious change from the Holo to the T+A was the Bass! Wow… I’ve been wondering where the slam and punch has been in these Wilson’s.. I have tried many solutions to pull the clean bass I love out of this set up. I was getting there, but this DAC has me all the way there!

Secondly, it’s got to be the clarity of the vocals. Yes, the Holo Audio is amazing in this regard, no doubt. However, this new DAC has taken the clarity and intelligibility of lyrics to a new level. Its also responsible for revealing small details in tracks that I know VERY well to a new level. There are several tracks from an artist named “Tusks” where lyrics are amazing but sometimes feel a bit mumbled and there are ambient sounds all around you. This DAC pulled out sounds and echoes that I never noticed before, and those mumbles are easier to understand as actual words! Mind you the speakers and speaker cable’s I use are incredibly good at revealing detail. This DAC has exposed new details I was unaware of, which is one of the things I love about this expensive hobby.

Next, it’s got to be the widening of the soundstage. The sweet spot in my room has been pretty limited since I installed the Holo Audio DAC. The sound has been amazing, but I do need to make sure I’m dead center to get the whole experience.

The T+A has broadened the soundstage and made it (sorry) more holographic. I hear better separation of sounds and it makes the listening more engaging, while allowing me to sit off center and still enjoy a great listening experience (yes dead center is still the best, but now I can have a friend sit next to me and we enjoy the same experience!)

The burn in process continues, and I do notice small improvements when I go downstairs to check in after a whole day of burn time. So I expect to hear more details as the hours pass.

Another key point to mention, is that many times when I hear a “cleaner” more revealing system, it comes at the expense of annoying high frequency glare from cymbals or female vocals. The kind of stuff that can drive you nuts and force you to turn the volume down. Thus far, I have not experienced this with the new DAC. This was something I did experience with the Holo Audio at times and figured it was just a poor recording situation.

Interestingly, I went back and forth between the AES and USB connection between my transport and the DAC, and the difference was subtle at best. With the Holo Audio, I much preferred the AES connection to the USB. I think I still prefer the AES connection at this point. I do not stream content from a PC as many do.

Mind you, in the end I have absolutely no dog in this fight. I would have gladly accepted that the Holo Audio DAC was “just as good” and happily retrieved my $7,000.00 dollars from my dealer. I have 45 days to return this new T+A DAC…. But it appears that the new DAC is staying in the setup, unless something changes drastically in the negative direction.

One observation that I did notice that I think the Holo does more consistently is pull vocals forward, which I like. With some tracks I did notice that T+A presented voices a bit further back with instruments. It was weird, because on some tracks the voices were up front and almost startling in how real they presented themselves. So it’s not an across the board experience. Not a huge deal, but it was observed.

From a more personal taste perspective, I absolutely LOVE the look of this DAC in my system. I think T+A did a great job with the fit and finish. The dial is made out of Aluminum! YES!.. the dial is not plastic, nor are the buttons. The set-up menu was super easy to navigate. This is a super high quality piece of gear, much like the Holo Audio DAC.

I know people will say “but you only have the Spring DAC 3 KTE, not the MAY”. This is true, so I can only say that you will need to speak with others who have made that comparison (and ignore those who say the Holo is better with no real expereince hearing both side by side). This mini review is intended for those who have the same set up as I do and are on the fence as to which way to go as they contemplate the upgrade path.

As I continue the break in process, I will share updates if warranted.

Thank you.