Fritz Speakers

If you are doing Fritz + ub I strongly encourage you to plug the ports and raise tbe sub Hz as high as you can. Try it. 😁 but before you buy a sib you should listen in room.  Hi speakers put out a lot more bass in room than you think

PS - I wrote a blog about how wrong our assumptions are about how a speaker will sound in the room vs. the specs.

https://speakermakersjourney.blogspot.com/2021/12/room-speakers-eq.html

Curious if ≈ 50 Hz would be too high for the Sub frequency given that the Carbon 7’s are 3db down at 38Hz

Would too high of a sub crossover interfere constructively with the mains and all of a sudden it’s way too bassy?

the spec is +/- 3db so you can count on the bass cutoff to be -6 db from the level of bulk of the low treble and midrange ... thus start at 50 hz for the xo and adjust... the speaker is probably down 3 db closer to 50 hz -- incidentally, the good thing about rel subs as that both the xo frequency as well as level dials have detents, so you can track where you are in its range and adjust by small step

fritz is on this board frequently he may also chime in

When you speak with John (Fritz) please tell him I sent you.

I need some absolution. You want the speaker I have. Carrera 7 BE.